1
USER GUIDE
WIRELESS USB TO VGA AND AUDIO KIT
Model: 29596
1
Introduction.................................................................................................................................................2
Features......................................................................................................................................................3
System Requirements.................................................................................................................................4
Package Contents.......................................................................................................................................5
Device Overview
Wireless USB Host Adapter...............................................................................................................6
Wireless VGA Device Adapter...........................................................................................................7
Wireless Audio Device Adapter…………………………………………………………………………….8
Software/Device Installation........................................................................................................................9
Using the Wireless USB to VGA and Audio Kit..............................................................................18
Frequently Asked Questions.....................................................................................................................27
Video Playback Tips..................................................................................................................................30
Technical Specifications............................................................................................................................31
Cables To Go Warranty............................................................................................................................32
Important Safety Information.....................................................................................................................33
Appendix
Association with other devices.........................................................................................................34
Cable Association Procedure...........................................................................................................35
PIN Association Procedure..............................................................................................................37
PIN Change Procedure....................................................................................................................39
TABLE OF CONTENTS
2
Thank you for purchasing the TruLink™ Wireless USB to VGA and Audio Kit. This product utilizes the
latest in wireless technology, so you can display video and images on a remote monitor, projector, or
television up to 30 feet away. You can also send audio wirelessly to a display, audio device or set of
speakers. With a highly secure connection you can use this product in settings such as conference
rooms, classrooms, or in your home office/entertainment system. We recommend that you read this
manual thoroughly and retain for future reference.
INTRODUCTION
3
In-room wireless connectivity up to 30 feet
Conversion from USB format to UXGA/WSXGA video and two-channel stereo audio
Video streaming up to 720p resolution (at 1024 x 768 setting)
Native mode playback of high-resolution video
Support for extended desktop and dual monitor screen modes
Up to six computers can share one wireless display device*
Ultra-Wide Band operates in the frequency of 3.1GHz to 4.8GHz (WiMedia™ Band Group 1)
Certified Wireless™ USB 1.0 compliant
WiMedia 1.0 MAC & 1.1 PHY compliant
FEATURES
4
Microsoft® Windows® XP 32-bit with Service Pack 3 or higher
or Microsoft® Vista® 32-bit/64-bit
SYSTEM REQUIREMENTS
5
Wireless USB Host Adapter for your computer
Wireless VGA Device Adapter for your display
Wireless Audio Device Adapter for your audio device
Three (3) Dipole Antennas (one for each adapter)
3ft USB A Male/Mini-B Male Cable
USB Extender with Cradle
Two (2) AC Power Adapter (cord approx. 4ft)
User Guide
Quick Start Guide
Driver CD w/Electronic User Guide
PACKAGE CONTENTS
6
1 2
WIRELESS USB HOST ADAPTER
1. Link: Data Connection Indicator
• LED is solid when transfer device is connected
• LED blinks when data is being transferred
2. PWR: Power
• LED is solid when powered by the PC
DEVICE OVERVIEW
7
5
1
2
3
4 6 8
7
W
IRELESS VGA DEVICE ADAPTER
1. VGA : VGA Activity Indicator
• LED is solid when display cable is connected.
• LED is blinking when data is being transferred.
2. PWR: Power Indicator
• LED is solid when power is applied.
3. 1-2-3: Status Indicator
• Illuminated number/s indicates the Wireless USB host
adapter that is currently synced with the Wireless VGA
Device Adapter
4. PWR plug
• Power adapter socket
5. RESET
• Association history can be erased by pressing and
holding this button for 10 seconds.
6. HOST
• This button is used to select a different Wireless
USB host adapter.
7. USB connector
• In wireless mode, this connector is used for cable association
• In wired mode, this connector is used for wired operation
8. WIRELESS/WIRED switch
• Choose from wired or wireless mode by using this switch.
DEVICE OVERVIEW
8
5
2
WIRELESS AUDIO DEVICE ADAPTER
1. Activity Indicator
• LED is solid when display cable is connected.
• LED is blinking when data is being transferred.
2. PWR: Power Indicator
• LED is solid when power is applied.
3. PWR plug
• Power adapter socket
4. USB connector
• In wireless mode, this connector is used for cable association
• In wired mode, this connector is used for wired operation
5. 3.5mm Stereo Audio Input
• Connect your speakers or AV receiver to this input to output
audio
DEVICE OVERVIEW
1
4
3
9
IMPORTANT NOTE:
• If installing on Windows XP, Service Pack 3 (SP3) is required. Verify that this has been
installed before installing the Wireless USB To VGA Adapter Kit software.
• Before installing the software, make sure that the Wireless USB Host Adapter, Wireless
VGA Device Adapter, and Wireless Audio Device Adapter are not connected to the
computer. Also make sure that the Wireless VGA and Audio Device Adapters are not
powered.
S
TEP 1-INSTALLING THE SOFTWARE
Insert the CD provided and the screen below will appear. Select the “Software Installation” from the
menu.
SOFTWARE/DEVICE INSTALLATION
10
This will take you to the TruLink Wireless USB to VGA and Audio Kit InstallShield Wizard.
Click “Next” to go to proceed with the install.
Read and accept the Wireless USB software License
Agreement by clicking “Yes”.
SOFTWARE/DEVICE INSTALLATION
11
Read and accept the License Agreement for the
DisplayLink software.
After the software installs, your installation is complete
and you can hit the “Finish” button to exit the wizard.
Important: reboot/restart if prompted.
SOFTWARE/DEVICE INSTALLATION
12
STEP 2A – DEVICE INSTALLATION FOR THE WIRELESS VGA DEVICE ADAPTER
1. Connect one of the dipole antennas to the Wireless VGA Device Adapter.
2. Power on your display device (i.e. monitor, projector, television).
3. Using a VGA cable, connect the Wireless VGA Device Adapter to your display device, and then plug in
the power adapter to the Wireless VGA Device Adapter.
SOFTWARE/DEVICE INSTALLATION
13
S
TEP 2B-CONNECT THE WIRELESS AUDIO DEVICE ADAPTER
1. Connect another dipole antenna to the Wireless Audio Device Adapter.
2. Connect the Wireless Audio Device Adapter 3.5mm Stereo Audio Input to your PC audio speakers,
sound system, projector or television using the appropriate cable or adapter types. Plug in the power
adapter to the Wireless Audio Device Adapter.
SOFTWARE/DEVICE INSTALLATION
14
S
TEP 3 -DRIVER INSTALLATION FOR THE WIRELESS USB HOST ADAPTER
Your Wireless USB to VGA and Audio Kit has been pre-associated for you, meaning the Wireless USB
Host Adapter will automatically recognize the Wireless VGA and Audio Device Adapters upon being
powered and its successful driver installation. After the software installation you should see the Wireless
USB Manager icon in your Windows icon tray. Double-click on this icon to open the manager utility.
The Wireless USB Manager will open and instruct you on
what to do next (Figure: Wireless USB Manager Welcome
Screen).
1. Screw on one of the supplied dipole antennas to the
Wireless USB Host Adapter and connect the Wireless
USB Host Adapter to an available USB port on your
computer. You also have the option to connect the
Wireless USB Host Adapter to the USB Cradle provided
in the package if you need to make the adapter more
mobile.
Figure: Wireless USB Manager
SOFTWARE/DEVICE INSTALLATION
Figure: Wireless USB Manager Welcome
Screen
15
After you connect the Wireless USB Host Adapter to your computer, Windows will automatically install it
and you should get a successful install message in your icon tray such as this figure shows.
SOFTWARE/DEVICE INSTALLATION
Figure: Successful Install Message
or
16
The Wireless USB Host Adapter will search for the Wireless VGA and Audio Device Adapters. When
association is confirmed between the devices, the Activity Indicators will light up on the devices. The
TruLink DisplayLink Manager utility (Figure: TruLink DisplayLink Manager) will activate and install an icon
in the Windows icon tray. The TruLink Wireless USB to VGA and Audio Kit is now fully functional and you
are ready to use it.
VERIFY CONNECTION
In the Wireless USB Manager, you should see each
wireless device (Wireless VGA and Audio Device Adapter)
icon represented (Figure: Wireless VGA and Audio Device
Adapter Connected), which verifies an active connection
status.
SOFTWARE/DEVICE INSTALLATION
Figure: TruLink DisplayLink Manager
Figure: Wireless VGA and Audio
Device Adapter Connected
17
Note: The default setting extends your desktop to the right so you should see the desktop background on
the wireless display device, but you will not see any icons initially. You may continue to use it in this
setting allowing you to open applications and documents on the wireless display device to increase your
viewing area or this may be switched to “Mirror” mode to clone your main display image. Settings are
discussed further in the next section.
SOFTWARE/DEVICE INSTALLATION
18
WIRELESS VGA DISPLAY SETTINGS
The TruLink Wireless VGA Device Adapter hosts a number of various settings so that you may configure
your image to the way you need it.
After you have installed the Wireless USB to VGA and Audio Kit, an icon representing a monitor will
appear in your Windows icon tray. This is the TruLink DisplayLink Manager. From this utility, you can
adjust your image settings. To open the manager, right click on the icon in the Windows tray (Figure:
TruLink DisplayLink Manager). A menu (Figure: Display Settings Menu) will appear and you will have the
ability to change parameters such as resolution, color quality, mirror mode or extension mode and more.
USING THE WIRELESS USB TO VGA AND AUDIO KIT
Figure: TruLink DisplayLink Manager
19
NOTE: By default, your monitor will be set for the best resolution and will extend your screen to the right.
Figure: Display Settings Menu
USING THE WIRELESS USB TO VGA AND AUDIO KIT
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
