UGREEN 90912 Installation guide

Hello! I've reviewed the provided user guide for DisplayLink driver installation on macOS Monterey. This document includes instructions on driver installation process and the need to grant screen recording permission for proper functioning. I'm ready to answer any questions you may have about this guide and the driver.
What should I do before installing the DisplayLink driver?

What permission is needed for DisplayLink to work correctly on macOS Catalina 10.15 or later?

Where to get driver?

Driver Installation Guide

Take as macOS Monterey (version 12) as an example:

一. Before Installation

1. If you have installed a previous version of the DisplayLink driver, please uninstall the DisplayLink Manager

app and reboot your system before proceeding.

2. Enter "System Preferences">"Security & Privacy".

3. Click "General">Select "APP Store and identified developers"

Note: Depending on your system's security settings, the installer may be blocked and present you with a warning.

Before installation, please ensure the DisplayLink driver is approved by clicking the "Allow" button in the

"Security & Privacy". There is also a chance that the warning message about the blocked System Extension will

not appear, but macOS may still block the extension. After the driver installation completes, please double-check

that the necessary approval was granted.

二. Driver Installation

1. Please install the driver first before connecting the dock to your computer. It is recommended to get the driver

here: https://www.mediafire.com/file/fr83tkdnbx9akif/90912.zip/file

Tips: For optimal operation, please update the driver to the latest versions available.

2. Click "Download".

3. Click "Accept".

4. Double click.

5. Click "Continue" on "Introduction" page.

6. Click "Continue" on "Licence" page.

7. Click "Agree" when prompted.

8. Click "Install" on "Installation Type" page.

9. Input your password and click "Install Software".

10. When the driver is installed successfully, please click "Close" on "Summary" page as the following picture

shows.

11. Click "Move to Bin".

三. How to Use

To enable "Screen Recording"

Note: Starting with macOS Catalina 10.15, the OS requires the user to permit "Screen Recording" for DisplayLink

devices to work correctly. The message is generated by the OS and the screen is not recorded by DisplayLink.

Approving it enables the DisplayLink driver to access the pixels it needs to render a mirrored or extended screen

and send them over USB from your computer to the DisplayLink display.

1. Enter "System Preferences" > "Security & Privacy".

2. Scroll down to "Screen Recording" > click "< >" > click "+" > search and select DisplayLink Manager.

3. Enter password to allow the system to make changes.

4. Click "Quit and Reopen" when prompted.

5. Click "< >" to save the changes.

6. Click "< >" > Click "Home" > Click "Launch automatically after login".