Altronix ALTV248Mi220 Installation guide

Altronix
Brand
Altronix
Model
ALTV248Mi220
Category
Security camera accessories
Type
Installation guide

This manual is also suitable for

Altronix ALTV248Mi220 is an isolated CCTV power supply that provides 24VAC distributed via eight (8) 1.6A PTC protected isolated outputs for powering CCTV cameras, heaters, and other video accessories. It features an illuminated master Power ON/OFF switch with a built-in circuit breaker to protect the device from overloads. The unit maintains camera synchronization, making it ideal for use in multi-camera surveillance systems. Its ease of installation saves time and eliminates costly labor, while the included spare fuses ensure that you have replacements on hand if needed.

Altronix ALTV248Mi220 is an isolated CCTV power supply that provides 24VAC distributed via eight (8) 1.6A PTC protected isolated outputs for powering CCTV cameras, heaters, and other video accessories. It features an illuminated master Power ON/OFF switch with a built-in circuit breaker to protect the device from overloads. The unit maintains camera synchronization, making it ideal for use in multi-camera surveillance systems. Its ease of installation saves time and eliminates costly labor, while the included spare fuses ensure that you have replacements on hand if needed.

Rev. 041112
220 Isolated Series
CCTV Power Supplies
Installation Guide
Models Include:
• ALTV248Hi220 • ALTV248CBHi220
- 24VAC @ 14A total output. - 24VAC @ 14A total output.
- Eight (8) 1.75A Fuse Protected - Eight (8) 1.75A PTC Protected
Isolated Outputs. Isolated Outputs.
• ALTV248Mi220 • ALTV248CBMi220
- 24VAC @ 12.5A total output. - 24VAC @ 12.5A total output.
- Eight (8) 1.6A Fuse Protected - Eight (8) 1.6A PTC Protected
Isolated Outputs. Isolated Outputs.
• ALTV2416i220 • ALTV2416CBi220
- 24VAC @ 28A total output. - 24VAC @ 28A total output.
- Sixteen (16) 1.75A Fuse Protected - Sixteen (16) 1.75A PTC Protected
Isolated Outputs. Isolated Outputs.
- 2 - IIisolated220 series
Overview:
These Altronix Isolated CCTV Power Supplies provide 24VAC distributed via eight (8) or sixteen (16) fuse or PTC protected
isolated outputs for powering CCTV cameras, heaters, and other video accessories.
220 Isolated Power Supply Reference Chart:
Altronix
Model Number
Output
Voltage
Total
Output
Current
(Power)
Number of
Outputs
PTC
Protected
Outputs
Fuse
Protected
Outputs
Output
Current
(max per
output)
220VAC
50/60Hz Input
Current
ALTV248Hi220
24VAC
14A
8
-
P
1.75A 2.7A
ALTV248CBHi220
P
-
ALTV248Mi220
12.5A
-
P
1.6A 2.7A
ALTV248CBMi220
P
-
ALTV2416i220
28A 16
-
P
1.75A 5.4A
ALTV2416CBi220
P
-
Specifications:
Installation Instructions:
1. Mount unit in the desired location.
2. Set power switch to the OFF positon on all models (Figs. 1-3, pgs. 3-5).
3. All units are factory set for 24VAC operation.
4. Connect AC power to the black and white flying leads of the transformer(s) (Figs. 1-3, pgs. 3-5)
.
Use 18 AWG or larger for all power connections.
5. Measure output voltage before connecting devices. This helps avoiding potential damage.
Terminals marked [1A - 8A] and [1B - 8B] are of the same polarity (phase).
6. Connect CCTV cameras to the output terminals using the following procedure:
Camera 1 to output 1A and 1B. Camera 5 to output 5A and 5B.
Camera 2 to output 2A and 2B. Camera 6 to output 6A and 6B.
Camera 3 to output 3A and 3B. Camera 7 to output 7A and 7B.
Camera 4 to output 4A and 4B. Camera 8 to output 8A and 8B.
7. Set power switch on all models to the “RESET” (ON) position (Figs. 1-3, pgs. 3-5).
8. Upon completion of the wiring, secure enclosure door with screws (supplied).
CAUTION: Equipment to be installed/serviced by authorized/trained personnel only.
Shut branch circuit power before installing/servicing equipment.
WARNING: To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture.
This installation should be made by qualified service personnel and should conform to the National
Electrical Code and all local codes.
Terminal Identification:
PD8I - Power Distribution Module
1A - 8A Phase 1.
1B - 8B Phase 2.
Features:
• Illuminated master Power ON/OFF switch
w/built in circuit breaker.
• Unit maintains camera synchronization.
• Ease of installation saves time and eliminates costly labor.
• Spare fuses included (on fuse protected models).
Enclosure Dimensions (H x W x D approximate):
ALTV248Mi220 and ALTV248CBMi220:
8.5” x 7.5” x 3.5” (215.9mm x 190.5mm x 88.9mm)
ALTV248Hi220, ALTV248CBHi220,
ALTV2416i220 and ALTV2416CBi220:
13.5” x 13” x 3.25” (342.9mm x 330.2mm x 82.55mm)
IIisolated220 series - 3 -
Fig. 1 - ALTV248Hi220 • ALTV248CBHi220
Power
Switch
1A
F1 F2 F3 F4 F5 F6 F7 F8
2A 3A 4A 5A 6A 7A 8A
1B 2B 3B 4B 5B 6B 7B 8B
XFMR*
1A
F1 F2 F3 F4 F5 F6 F7 F8
2A 3A 4A 5A 6A 7A 8A
1B 2B 3B 4B 5B 6B 7B 8B
Used on PTC Models
(example: ALTV248CBHI220)
Green
Lead
(ground)
220VAC
input
50/60 Hz.
WARNING: Change fuses with the same type and rating.
Output: 3.5A @ 250V
- 4 - IIisolated220 series
Fig. 2 - ALTV248Mi220 • ALTV248CBMi220
Transformer
underneath
power supply
board
Power
Switch
1A
F1 F2 F3 F4 F5 F6 F7 F8
2A 3A 4A 5A 6A 7A 8A
1B 2B 3B 4B 5B 6B 7B 8B
1A
F1 F2 F3 F4 F5 F6 F7 F8
2A 3A 4A 5A 6A 7A 8A
1B 2B 3B 4B 5B 6B 7B 8B
Used on PTC Models
(example: ALTV248CBMI220)
WARNING: Change fuses with the same type and ratng.
Output: 3.5A @ 250V
IIisolated220 series - 5 -
Fig. 3 - ALTV2416i220 • ALTV2416CBi220
Power
Switch
1A
F1 F2 F3 F4 F5 F6 F7 F8
2A 3A 4A 5A 6A 7A 8A
1B 2B 3B 4B 5B 6B 7B 8B
1A
F1 F2 F3 F4 F5 F6 F7 F8
2A 3A 4A 5A 6A 7A 8A
1B 2B 3B 4B 5B 6B 7B 8B
XFMR* XFMR*
1A
F1 F2 F3 F4 F5 F6 F7 F8
2A 3A 4A 5A 6A 7A 8A
1B 2B 3B 4B 5B 6B 7B 8B
Used on PTC Models
(example: ALTV2416CBI220)
Green
Lead
(ground)
220VAC
input
50/60 Hz.
WARNING: Change fuses with the same type and rating.
Output: 3.5A @ 250V
- 6 - IIisolated220 series
Enclosure Dimensions for:
• ALTV248Mi220
• ALTV248CBMi220
8.5” x 7.5” x 3.5” (215.9mm x 190.5mm x 88.9mm)
1.25”
(31.75mm)
1.25”
(31.75mm)
1.25”
(31.75mm)
1.125”
(28.575mm)
1”
(25.4mm)
1”
(25.4mm)
1”
(25.4mm)
5.25”
(133.35mm)
6.05”
(153.67mm)
6.05”
(153.67mm)
3.5”
(88.9mm)
3.5”
(88.9mm)
7.25”
(184.15mm)
2”
(50.8mm)
2”
(50.8mm)
8.125”
(206.375mm)
0.6”
(15.24mm)
1”
(25.4mm)
1”
(25.4mm)
0.6”
(15.24mm)
0.6”
(15.24mm)
1.125”
(28.575mm)
0.6”
(15.24mm)
3.625”
(184.15mm)
IIisolated220 series - 7 -
Enclosure Dimensions for:
• ALTV248Hi220
• ALTV248CBHi220
• ALTV2416i220
• ALTV2416CBi220
13.5” x 13” x 3.25” (342.9mm x 330.2mm x 82.55mm)
1.40”
(36mm)
1.40”
(36mm)
4.85”
(123mm)
4.85”
(123mm)
1.40”
(36mm)
1.40”
(36mm)
5.10”
(130mm)
5.10”
(130mm)
13.0”
(330mm)
5.10”
(130mm)
6.5625”
(167mm)
1.20”
(31mm)
1.20”
(31mm)
1.20”
(31mm)
3.25”
(83mm)
3.25”
(83mm)
3.25”
(83mm)
3.25”
(83mm)
1.0”
(25mm)
1.0”
(
25mm
)
10.5”
(
267mm
)
1.0”
(
25mm
)
1.0”
(25mm)
0.75”
(19mm)
0.75”
(19mm)
0.9375”
(24mm)
0.9375”
(24mm)
11.0”
(279mm)
12.5”
(318mm)
- 8 - IIisolated220 series
Altronix is not responsible for any typographical errors.
Altronix Corp. 140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: 718-567-9056
web site: www.altronix.com, e-mail: [email protected], Lifetime Warranty, Made in U.S.A.
Isolated220Series A12P
MEMBER
Notes
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Altronix ALTV248Mi220 Installation guide

Altronix
Brand
Altronix
Model
ALTV248Mi220
Category
Security camera accessories
Type
Installation guide
This manual is also suitable for

Altronix ALTV248Mi220 is an isolated CCTV power supply that provides 24VAC distributed via eight (8) 1.6A PTC protected isolated outputs for powering CCTV cameras, heaters, and other video accessories. It features an illuminated master Power ON/OFF switch with a built-in circuit breaker to protect the device from overloads. The unit maintains camera synchronization, making it ideal for use in multi-camera surveillance systems. Its ease of installation saves time and eliminates costly labor, while the included spare fuses ensure that you have replacements on hand if needed.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents