Overview:
The Altronix ALTV615DC8ULCB CCTV Power Supply is designed with eight (8) individually PTC power limited,
Class 2 Rated outputs for powering CCTV Cameras and other video accessories. It will provide 6VDC-15VDC
distributed via eight (8) PTC outputs with a total of up to 4 amp continuous supply current.
Specifications:
Agency Listings:
• ULListedforCommercialClosed-CircuitTelevisionEquipment(UL2044).
• CULListed-CSAStandardC22.2No.1-98,Audio,VideoandSimilarEquipment.
Input:
• Input115VAC50/60Hz,0.9amp.
Output:
• 6VDC-15VDCadjustableoutput.
• Eight(8) individually PTC protected, Class 2 Rated
power-limited outputs.
• 4amptotalcontinuoussupplycurrent.
• Filteredandelectronicallyregulatedoutputs.
PTC Ratings:
• OutputPTCsareratedat2.5amp/250VAC(Fig. 1).
Visual Indicators:
• ACinputandDCoutputLEDindicators.
Additional Features:
• Sparefusesincluded.
•Unitmaintainscamerasynchronization.
• Easeofinstallationsavestimeandeliminatescostlylabor.
Enclosure Dimensions (H x W x D approx.):
13.5”x13”x3.25”(342.9mmx330.2mmx82.55mm).
Note: For a model with factory installed 3-wire
line cord add suffix “3” (e.g. ALTV615DC8ULCB3)
and disregard paragraph 2 in
Installation Instructions.
Installation Instructions:
1. Mount ALTV615DC8ULCB in desired location.
2. Connectgreenleadtoearthground.ConnectAC(115VAC50/60Hz)totheblackandwhiteflyingleadsofthe
transformer (Fig. 1). Useknockoutadjacenttothetransformer.0.25”spacingmustbeprovidedbetweenACinput
wiring and all other circuits.
3. AdjustoutputvoltageusingtrimpotontheboardpriortoconnectingCCTVdevices.
4. Measure output voltage before connecting devices. This helps avoiding potential damage.
Terminalsmarked[1P-8P]arepositive(+)andterminalsmarked[1N-8N]arenegative.
CAUTION: Determine the maximum operating voltage of the equipment being powered before adjusting the
output voltage.
5. ConnecteachDCCCTVcamerastotheterminalpairsmarked[1P-1N]through[8P-8N]onPD8board(Fig. 1),
carefully observing correct polarity.
6. GreenLEDwillilluminatewhenwhenunitispowered.
7. Upon completion of the wiring secure enclosure door with screws (supplied).
Keep power-limited circuits (outputs 1 through 8) away from non power-limited. 0.25” space must be provided.
Use separate knockouts.
Caution: Equipment to be installed/serviced by authorized/trained personnel only.
Shut branch circuit power before installing/servicing equipment.
WARNING: To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture.
This installation should be made by qualified service personnel and should conform to NEC and all local
codes.
ALTV615DC8ULCB
CCTV Camera and Accessory Power Supply
Door
Green
Lead
Wire
Strap
(from
Enclosure
to Door)
XFMR
Black
Lead
White
Lead
115VAC input
50/60 Hz,
0.9 amp
non power-
limited
N
COMMON POWER OUTPUTS
P
FUSED POWER OUTPUTS
1 2 3 4 5 6 7 8
D1
INPUT
R1
LED
F1 F2 F3 F4 F5 F6 F7 F8
+ DC -
- BA T +
AC AC
DC
AC
Voltage
Adjustment
Class 2 Not Wet/
Class 3 Wet
Use separate
knockouts for
power-limited
circuits.
Fig. 1