Specifications
AL600PD8CB220 is a multi-output power supply/charger which converts a
220VAC, 50/60Hz input into eight (8) 12VDC or 24VDC non-power limited out-
puts.
AL600PD8CB220
Multi-Output Power Supply/Charger
Rev. DSAL600PD8CB220_04242012
Overview
AL600PD8CB220
Input:
• Input220VAC,50/60Hz,1.5amp.
Output:
• 12VDC or 24VDC selectable output.
•6ampcontinuoussupplycurrent.
• Eight(8)PTC protected non-power limited outputs.
• Outputsarerated@2.5amp.
• Filteredandelectronicallyregulatedoutput.
• Shortcircuitandthermaloverloadprotection.
Battery Backup:
• Built-inchargerforsealedleadacidor
gel type batteries.
• Automaticswitchovertostand-bybattery
whenACfails.
• Maximumchargecurrent0.7amp.
Supervision:
• ACfailsupervision(form“C”contacts).
• Lowbatterysupervision(form“C”contacts).
• Batterypresencesupervision(form“C”contacts).
Visual Indicators:
• ACinputandDCoutputLEDindicators.
Electrical:
• Operatingtemperature:0ºCto49ºCambient.
• 27-55BTU/Hr.
• SystemACinputVArequirement:330VA.
Mechanical:
• EnclosureDimensions(HxWxDapprox.):
13.5”(342.9mm)x13”(330.2mm)x3.25”(82.55mm)
- Accommodatestwo(2)12VDC/7AHbatteries.
• Productweight(approx.):7.4lbs.(3.36kg.).
• Shippingweight(approx.):8.4lbs.(3.81kg.).