2. Knight
  3. Game Barstool

Knight Game Barstool Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the Game barstool. This document provides a step-by-step guide on assembling the barstool using a Phillips screwdriver. It covers attaching the back shell to the frame, and mounting the back pad. I'm ready to answer your questions about the assembly process.
  • What tool is required for assembly?
    What is the first step of assembly?
    What to do after sliding the back shell?
    What is the third step in the assembly process?
knightgroup.co.nz
Assembly Instructions
Tools Required: Phillips Screwdriver
Game Barstool
knightgroup.co.nz
Assembly Instructions
Game Barstool
Warning: Failure to follow these assembly instructions can result in product failure, personal injury or property damage.
knightgroup.co.nz
Assembly Instructions
Game Barstool
Slide back shell over chair frame.
Mount back pad to the back shell.
Tighten back shell to chair frame with provided screws.
Pre-drill holes into the back shell, fully tighten the back
pad to back shell with provided screws.
Step 1
Step 3
Step 2
Step 4
/