Label Picture Description QTY
A Chair Seat 1
B Backrest 1
Picture
Caution : You must read this before you proceed
Barstool
Label Picture Description QTY
① Nut 5
② Wrench 1
Before
Beginning
Assembly:
Step 1
Step 2
Place the Chair Seat(A) and Backrest(B) onto a clean, non-marring surface.
Align the mounting positions on the Chair Seat(A) and the Backrest(B)
Overview
This Barstool has multiple parts and may require up to some 30 minutes to assemble. To
give you an overview of the 2 parts, the above picture is to help you put the various parts
into perspective. Please read through the instructions below to familiarise yourself with
the parts and steps before assembly.
Chair
Seat(A)
Backrest(B)
Backrest(B)
ChairSeat(A)
Backrest(B)
Chair
Seat(A)
B
A
Step 3
Step 4
Step 5
Using the Wrench (②) to lock nuts (①).
Your Barstool is ready for use.
This Barstool can only be used on a flat, level surface.
Revolve the Chair Seat(A) to adjust the Barstool's height.
Tight all nuts ,finished.
Backrest(B)
Chair
Seat(A)
/
