Knight SCROLL Assembly Instructions

Type
Assembly Instructions
knightgroup.co.nz
Assembly Instructions
Scroll
knightgroup.co.nz
Assembly Instructions
Scroll
Warning: Failure to follow these assembly instructions can
result in product failure, personal injury or property damage.
No tools required.
1. Open carton and unpack all components.
2. Turn chair base upside down and insert castors into the holes provided,
pressing down firmly on castors to ensure a secure fit.
3. Turn chair base right side up and insert gas lift cylinder into large hole through chair base.
4. Carefully place seat/backrest assembly onto gas lift cylinder , fitting cylinder into hole
in bottom of control mechanism. Press down firmly to ensure a secure fit.
5. Without adjusting seat height, sit firmly in chair to complete assembly.
Star Base
Castors
Gas Lift
Seat/Backrest
with Mech
PARTS KEY:
  • Page 1 1
  • Page 2 2

Knight SCROLL Assembly Instructions

Type
Assembly Instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI