Sysinfo
Test OpenVPN
Topology
M300-1
Condition:
1. M300-1, M300-2 OpenVPN enable
2. PC-B send traffic to PC-B should be pass
1.1
WAN
3.1
1.35
3.2
OpenVPN Server
192.168.10.x
M300-2
PC-A
OpenVPN Client
PC-B
Internet
LTE
OpenVPN Server setting:
TAP mode
VPN Network fill in 192.168.10.0, Route Client Networks enable and fill in #1
Create Root CA, Cert Key and User1 (fill in password), and download
ETH WAN type based on your network (I use PPPoE)
OpenVPN Server, Using Eth WAN and ip is 36.226.190.103
OpenVPN Client setting:
Tap mode and server ip fill in 36.226.190.103
Import Root CA and User1 Cert and key from OpenVPN Server
Result:
OpenVPN connect success : pass
/