George Kovacs GKLR096-467 User manual

INSTALLATION INSTRUCTIONS

For Model # GKLR096

Fig. 1

Fig. 2

Fig. 3

Fig. 4

1. Unscrew the Allen Set Screws using the Allen

Wrench provided.

2. Insert the ends of the Rail firmly into the Rail

Joiners and then tighten the Allen Set Screws.

3. Remove the Standoff Caps. Slide the Rail into

the Standoff. While supporting the Rail, screw

the Standoff Caps back onto each of the

Standoffs.

4. Your installation is now complete.

LA-1204E

IMPORTANT: FIXTURE SHOULD BE INSTALLED BY

A QUALIFIED ELECTRICIAN TO ENSURE PROPER

WIRING AND INSTALLATION.

This manual is also suitable for