Fireye TD-00-8-500F-0-002-A - 129-199 WINC Connector Kit Technical Instructions

  • I have reviewed the provided technical document for the Fireye 129-199 Field Wired Quick Disconnect and its compatibility with the 95DSS3-1WOC. The document covers the components included in the kit, the installation procedure, and the wiring color codes. I'm ready to answer any questions you have about this product.
  • What is the 129-199 quick disconnect designed for?
    What components are included in the 129-199 kit?
    What torque should be used when installing the adapter?
    What sealant is recommended for the adapter threads?
CONTENTS
1. 3/4″ Adapter
2. Gasket
3. Male quick disconnect & wires
4. Screws (4 total)
5. Plug, hole 1/2″ NPT
129-199 Field Wired Quick Disconnect
95DSS3 - 1WOC
DESCRIPTION
The 129-199 eld wired quick disconnect is
designed to be used with the 95DSS3-1WOC
where the end user selects which functions
they wish to utilize.
INSTALLATION
1. Install adapter into 3/4″ opening of the 95DSS3-1WOC and torque to 88 in/lbs. If adapter is not parallel to
housing, rotate clockwise as needed. Torque can exceed requirements to locate to parallel position.
Fireye recommends the use of sealant on threads, such as Loctite 567 or equivalent.
2. Slide gasket over wires of male quick disconnect (QD).
3. Insert wires of male QD through adapter making sure large keyway is set to 3:00 o’clock position.
4. Secure with 4 screws.
5. Install plug into 1/2″ opening of the 95DSS3-1WOC.
6. Wire as needed per the table below.
Viewed from behind
InSight® II
Technical Document
A Black Black/Red
B White White/Blue
C White/Black White/Black
D White/Red White/Red
Pin Adapter Color 59-497 Color
E Red Red
F Green Pink
G Violet Violet
H Grey Grey/Red
J Blue Blue/Red
K Yellow Yellow
L Brown Brown
M Orange Orange
2
4
3
1
reye.com
TD-00-8-500F-0-002 (2023/07)
All trademarks and service marks referred herein are property of their respective owners.
©2023 Carrier. All Rights Reserved.
133-798
July 27, 2023
Join us on
5
/