Brigade AC-24-12(002) (4266) Owner's manual

IN:DC12V-32V

OUT:DC10V~12V/1.5A

OUT

VIDEO PLUG (CONNECTS

TO VEHICLE INTERFACE)

POWER SUPPLY CAMERA:

CONTACT 15 - IGNITION LIVE (+12-24V) (RED)

CONTACT 31 - GROUND (BLACK)

PROPRIETARY NOTICE

THE EXPRESS WRITTEN CONSENT OF BRIGADE ELECTRONICS.

PROPRIETARY NOTICE

THE EXPRESS WRITTEN CONSENT OF BRIGADE ELECTRONICS.

THIS DESIGN AND TECHNICAL INFORMATION APPEARING ON THIS DRAWING IS THE PROPERTY OF BRIGADE ELECTRONICS, AND IS DISCLOSED

IN CONFIDENCE. IT IS NOT TO BE COPIED, REPRODUCED, REVEALED TO OR EXPROPRIATED BY OTHERS, EITHER IN WHOLE OR IN PART WITHOUT

www.brigade-electronics.com

THIS DESIGN AND TECHNICAL INFORMATION APPEARING ON THIS DRAWING IS THE PROPERTY OF BRIGADE ELECTRONICS, AND IS DISCLOSED

IN CONFIDENCE. IT IS NOT TO BE COPIED, REPRODUCED, REVEALED TO OR EXPROPRIATED BY OTHERS, EITHER IN WHOLE OR IN PART WITHOUT

www.brigade-electronics.com

ITEM PART NO. MODEL/DESCRIPTION

1 N/A CAMERA

2 N/A CAMERA EXTENSION CABLE

3 4266

AC-24-12(002)

NOTES:

1. COMPATIBLE WITH MERCEDES ACTROS, ANTOS & AROCS TO 01/01/2014. REFER TO MANUFACTURERS GUIDELINES FOR LATER VERSIONS.

2. FOR CONNECTION POINTS PLEASE REFER TO VEHICLE MANUFACTURERS GUIDELINES.

3. VEHICLE MUST HAVE MANUFACTURER'S FACTORY MONITOR PRE-INSTALLED.

3. VEHICLE WILL NEED TO BE PROGRAMMED TO ENABLE MONITOR FUNCTIONALITY.

4. DO NOT SHORT CIRCUIT.

5. POWER SUPPLY MUST BE FUSED.

6. SYSTEM CONFIGURATION SHOWN AS EXAMPLE ONLY.

7. REFER TO COMPONENT DRAWING FOR COMPONENT DETAIL.

(478)