Hubbell 31.210 User manual

Hubbell
Brand
Hubbell
Model
31.210
Category
Network switches
Type
User manual

Hubbell 31.210 is a compact locomotive radio control system. It features internal diagnostics run by a microprocessor, continuous monitoring, and an operational status readout in English. The system also includes a new “Compact” receiver with a diagnostic display module and a new “Compact” pneumatics interface with analog valves for throttle/brake control. The Hubbell 31.210 is a versatile system that can be used with any of the Hubbell transmitters and is ideal for use in a variety of locomotive applications.

Hubbell 31.210 is a compact locomotive radio control system. It features internal diagnostics run by a microprocessor, continuous monitoring, and an operational status readout in English. The system also includes a new “Compact” receiver with a diagnostic display module and a new “Compact” pneumatics interface with analog valves for throttle/brake control. The Hubbell 31.210 is a versatile system that can be used with any of the Hubbell transmitters and is ideal for use in a variety of locomotive applications.

Hubbell Industrial Controls, Inc.
Spec Sheet 31.210 • August 2000 • New
Compact
Locomotive
Radio
Control
System
Hubbell Radio Remote Control Systems
HUBBELL
Internal Diagnostics
• Run by microprocessor on internal programs
• Run by microprocessor on commands and I/O
• Power-up diagnostics
• Continuous monitoring
Operational Status Readout
• English language display of status
Controls System Features
• New “Compact” receiver with diagnostic
display module
• New “Compact pneumatics interface with
analog valves for throttle/brake
• For use with any of the Hubbell transmitters,
see Catalog 31.300
Compact Receiver
• Proven rf module and micro I/O module from
radio crane control
• New “E–Stop” board
• New plug-in output interface cards
• Frequency: 72–76 or 450–470 MHz FM
• NEMA 12 enclosure – 24” h x 24” w x 12” d
Compact Pneumatic Interface
• Very compact manifold/valve assembly
• Analog valves for throttle and train-line brake
control
• Analog pressure indicators
• NEMA 12 enclosure – 24” h x 24” w x 12” d
Pneumatics Cabinet
Midsize Transmitter
(See Spec 31.320)
Receiver Cabinet
JPS-100-1M © 2000
Printed in U.S.A.
HUBBELL
50 Edwards Street
Madison, Ohio 44057
(440) 428-1161
Fax (440) 428-7635
4301 Cheyenne Drive
Archdale, NC 27263
(336) 434-2800
Fax (336) 434-2801
Hubbell Industrial
Controls, Inc.
a subsidiary of
Hubbell Incorporated
Hubbell Industrial Control Solutions
http://www.hubbell-icd.com/radiocontrols/
Outline Drawings
Receiver Cabinet
Weight — 90 lbs.
Pneumatic Cabinet
Weight — 110 lbs.
Specifcations
Supply Voltage ......................... 12VDC, 24VDC, 36VDC or 72VDC
Internal Power Requirements ........ +11.9–13.1VDC & +4.5–6.5VDC, 24 VDC
Operating Temperature .............. –22°F (–30°C) to 140°F (+60°C)
Radio Receiver
Frequency Range ...................... 72–76 MHz or 450–470 MHz
Channel Availability .................. as required by user
Frequency Stability .................... ±5 ppm
Sensitivity ................................ 1 µv @ 20 dB quieting
Data Reception ......................... compatible with Hubbell transmitters
Modulation .............................. Manchester II (bi-phase)
Baud Rate ............................... 4800 bps
Message Format ....................... preamble, sync, start flag, address, control, CRC
check code
Control Section
Single board computer consisting of 80C31 controller, 64k EPROM,
EPLD containing circuits for bi-phase decoding
DC Output Section (Electro-mechanical relays)
Panel mounted mother-board to accommodate 4 plug-in relay boards, each with 6 output
relays, for a maximum of 24 ac output relays and 12 sense inputs
Indicators ........................................... LED on each output
Feedback Sensing ............................... opto-isolated input from: AIR PRESSURE,
THROTTLE, BRAKE, FORWARD, REVERSE
relay outputs
Relays................................................ Standard PC board relays
Output Rating...................................... 115/230V ac, 50/60 Hz, 5A resistive;
12/24V dc, 5A resistive
Isolation ............................................. 5000V
DC Output Section (Stepped analog outputs)
Panel mounted mother-board to accommodate 4 plug-in boards, each with 1 analog output.
Indicators ........................................... LED on each of 8 levels
Output Rating ...................................... 0–10V dc, 20mA, in 8 steps
Isolation ............................................. 5000V
“E-Stop” Board
Plug-in PC board (plugs into motherboard of DC Output Section in place of 1 electro-
mechanical relay board)
Indicators ........................................... LED on each of 5 inputs and 1 output
Inputs ................................................ 5 inputs, optically isolated
Isolation ............................................. 5000V
Control Relays (DIN Rail Mounted)
Individual control relays, as required for locomotive functions.
NEMA P300 DC Inductive Rating .......... 5A Continuous at 250VDC Max.
138VA Make & Break Max.
BSS/.250;TPI=28/20;CHSD=.261;TDSF=.2130;TDSC=.2010
BSS/.250;TPI=28/20;CHSD=.261;TDSF=.2130;TDSC=.2010
BSS/.250;TPI=28/20;CHSD=.261;TDSF=.2130;TDSC=.2010
BSS/.250;TPI=28/20;CHSD=.261;TDSF=.2130;TDSC=.2010
24.00
4.13
8.00
25.50
24.00
22.50
25.50
24.00
22.50
Cast Hinges With Removable Hinge Pins
Shown With Door Removed
Alternate Mtg Position
+5V
LED1
+12V
LED2
J4
R5
GND
J3J2
MODULE 3 MODULE 4
1515S15
1A1A 1A
TB1
1
+12V
J1
B2
5V COM
R4
+5V
JMP3
JMP4
JMP5
JMP6
JMP1
JMP2
MODULE 1
JMP9
WBA4516
HUBBELL
R
S
14
+12V
15
GND
JMP8
JMP7
CN2CN1
1
1
1A
MODULE 2
+5V
LED1
+12V
LED2
J4
R5
GND
J3J2
MODULE 3 MODULE 4
1515S15
1A1A 1A
TB1
1
+12V
J1
B2
5V COM
R4
+5V
JMP3
JMP4
JMP5
JMP6
JMP1
JMP2
MODULE 1
JMP9
WBA4516
HUBBELL
R
S
14
+12V
15
GND
JMP8
JMP7
CN2CN1
1
1
1A
MODULE 2
HUBBELL
WB4520
WBA4528
WBA4528
WBA4528
WBA4536
WBA4535
WBA4536
WBA4528
43
A1
332313
3424 44
A2
14
43
A1
332313
3424 44
A2
14
43
A1
332313
3424 44
A2
14
43
A1
332313
3424 44
A2
14
43
A1
332313
3424 44
A2
14
43
A1
332313
3424 44
A2
14
1
+OUT
T
+S
3
4
5
ASSY:
REV:
WBA4491
-OUT
-S
2
12V
978654321
J3
VR2
VR1
J2J1
5V
WBA4490_ ASSY REV_
PT.
SER.
MODEL NO.
V.
Hubbell Industrial
Controls, Inc.
4301 Cheyenne Drive
HUBBELL
Archdale, N.C. 27263
RESET
REMOTE
MANUAL
BSS/.250;TPI=28/20;CHSD=.261;TDSF=.2130;TDSC=.2010
BSS/.250;TPI=28/20;CHSD=.261;TDSF=.2130;TDSC=.2010
24.00
24.00
12.00
25.50
22.50
L
C
Right Side View Of Cabinet W/door Closed
F11
F5
F6
F14 F15F12 F13
F10F9
F4F3
F7
F1
F2
F8
HUBBELL
SER.
PT.
MODEL NO.
Archdale, N.C. 27263
Hubbell/Industrial
4301 Cheyenne Dr.
Controls, Inc.
PT.
SER.
MODEL NO.
V.
Hubbell Industrial
Controls, Inc.
4301 Cheyenne Drive
HUBBELL
Archdale, N.C. 27263
  • Page 1 1
  • Page 2 2

Hubbell 31.210 User manual

Hubbell
Brand
Hubbell
Model
31.210
Category
Network switches
Type
User manual

Hubbell 31.210 is a compact locomotive radio control system. It features internal diagnostics run by a microprocessor, continuous monitoring, and an operational status readout in English. The system also includes a new “Compact” receiver with a diagnostic display module and a new “Compact” pneumatics interface with analog valves for throttle/brake control. The Hubbell 31.210 is a versatile system that can be used with any of the Hubbell transmitters and is ideal for use in a variety of locomotive applications.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents