Ice-O-Matic EF250 User manual

Category
Ice cube makers
Type
User manual

Ice-O-Matic EF250 is a top-of-the-line ice maker designed to provide you with a constant supply of fresh, clean ice. With its ability to produce up to 400 lbs. of ice per day, it is perfect for use in restaurants, bars, healthcare facilities, schools, and other commercial settings. The EF250 also features a self-contained insulated storage bin with a capacity of either 143 lbs. or 213 lbs., so you can always have ice on hand when you need it. Constructed from sturdy, corrosion-resistant 300 series stainless steel, the EF250 is built to last.

Ice-O-Matic EF250 is a top-of-the-line ice maker designed to provide you with a constant supply of fresh, clean ice. With its ability to produce up to 400 lbs. of ice per day, it is perfect for use in restaurants, bars, healthcare facilities, schools, and other commercial settings. The EF250 also features a self-contained insulated storage bin with a capacity of either 143 lbs. or 213 lbs., so you can always have ice on hand when you need it. Constructed from sturdy, corrosion-resistant 300 series stainless steel, the EF250 is built to last.

®
EF 250 Series
Flake ICE Maker
EF 250
Problem
ICE-O-Matic
®
Tough
Constructed with a brass evaporator and rugged stainless
steel transport system enclosed in polyurethane insulation
Multiple Solutions
Storage of 143 pounds or 213 pounds of flaked ICE
ICE-O-Matic
®
is the Best ICE Making Solution for:
Hard Water, Food Safety and Tight Spaces
Solution
Operating Environments
Built to last?
Optimal Bin Storage
Bin not large enough?
Tight-Fitting Spaces
Kitchen space utilization
Produces up to 400 lbs. (182 Kgs.)* of ICE per day
Self-contained insulated storage available in
143 lbs. (65 Kgs.) or 213 lbs. (97 Kgs.)
Constructed from sturdy, corrosion-resistant
300 series stainless steel
Ultra-low profile - 41 inches (1041 mm) tall
Available with an air-cooled condenser
*Rated at 70 ° (21°) Air / 50° (10°) Water
Maximum ICE
Maximum ICE production in a minimum amount
of space with an ultra-low profile:
• 41 inches tall
• Air intake only on one side
• Choice of 32 or 38 inches wide
Dirty Air Filter
Forget to change the air filter?
Filter-Free Air
No air filter to change
EF250A32S 32 (813) 143 (65) Air 400 (182) 319 (145) 12.0 (45) n/a 5.6 4233 115/60/1 3 12.4 15 240 (109)
EF250A38S 38 (965) 213 (97) Air 400 (182) 319 (145) 12.0 (45) n/a 5.6 4233 115/60/1 3 12.4 15 250 (114)
Please note: air-cooled units require 6” (152 mm) clearance for air intake and exhaust.
Water Used-Gals. (Lits.) Kilowatts
ICE Production ICE Production per 100 lbs. of Ice Used per
per 24 hrs. at per 24 hrs. at 90° Air/70° Water 100 lbs. of ICE Min. Max. Shipping
Model Cab Size Bin Storage Cond. 70° Air/50° Water 90° Air/70° Water 90° Air Voltage No. of Circuit Fuse Weight
No. Width ”(mm) Lbs. (Kgs.) Unit lbs. (Kgs.) lbs. (Kgs.) 70° Water Btuh Characteristics Wires Amp. Size lbs. (Kgs.)
ICE Prod. Cond.
Use Use
60 Hz
ORDERING AND SPECIFICATION INFORMATION
OPERATING LIMITS
Ambient Temp. Range
Air & Water 50° - 110°F (10° - 43°C)
Water Temp. Range 40° - 100°F (4.5° - 38°C)
Water Pressure Ice Maker Min. 20 psi (1.4 bar)
Water in Max. 60 psi (6.9 bar)
27"
(686mm)
32.25"
(819mm)
24"
(610mm)
1.75"
(45mm)
3"
(76mm)
6.75"
(172mm)
8"
(203mm)
3
/4"
(19mm)
Bin Drain
3
/4" (19mm)-
FPT
38"
(965mm)
3
/
35"
(889mm)
41"
(1041mm)
6" (152mm)
to 7" (178mm)
Adj. Legs
27"
(686mm)
Bin Drain
3
/4" (19mm)-
FPT
3"
(76mm)
27"
(686mm)
32.25"
(819mm)
3
/4"
(19mm)
1.75"
(45mm)
35"
(889mm)
41"
(1041mm)
32"
(813mm)
6" (152mm)
to 7" (178mm)
Adj. Legs
EF 250
Conds. Air Temp. Water Temp. °F (°C)
Unit °F (°C) 80°(27°) 70°(21°) 50°(10°)
90° (32°) 297 (135) 319 (145) 351 (160)
80° (27°) 318 (144) 342 (155) 376 (171)
70° (21°) 338 (154) 364 (165) 400 (182)
All specifications and performance data are
subject to normal manufacturing variances.
Air
Cooled
32”
front view
38”
front view
38”
back view
32”
back view
Air in-
Left side of ICE Maker
28"
(711 mm)
Air in-
Left side of ICE Maker
28"
(711 mm)
32"
(813 mm)
Dimensions and Air Flow
38” Width
32” Width
41"
(1041 mm)
38"
(965 mm)
41"
(1041 mm)
Air out -
front of ICE Maker
Air out-
front of ICE Maker
ICE PRODUCTION CHART POUNDS
(KILOGRAMS) PER 24 HOURS
EF 250 Series Flake ICE Maker Self-Contained
28"
(711mm)
w
1.50"
(38mm)
Electrical Inlet
Icemaker Water Inlet
3
/8" (10mm) FPT
Drain
1
/2" (13mm) I.D. Plastic Tubing
32”, 38”
side view
We reserve the right to make changes in design and construction at any time
without obligation.
2003© ICE-O-Matic Rev Code: 2000A-06/03-SS
ICE-O-Matic 11100 E. 45th Avenue, Denver, CO 80239
Tel. 303 371-3737 Fax. 303 371-6296 www.iceomatic.com
®
I
S
O
9
0
0
1
C
E
R
T
I
F
I
E
D
À
  • Page 1 1
  • Page 2 2

Ice-O-Matic EF250 User manual

Category
Ice cube makers
Type
User manual

Ice-O-Matic EF250 is a top-of-the-line ice maker designed to provide you with a constant supply of fresh, clean ice. With its ability to produce up to 400 lbs. of ice per day, it is perfect for use in restaurants, bars, healthcare facilities, schools, and other commercial settings. The EF250 also features a self-contained insulated storage bin with a capacity of either 143 lbs. or 213 lbs., so you can always have ice on hand when you need it. Constructed from sturdy, corrosion-resistant 300 series stainless steel, the EF250 is built to last.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI