Ice-O-Matic ICE1506 Series User manual

Brand: Ice-O-Matic

Model: ICE1506 Series

Category: Ice cube makers

Type: User manual

ICE 1506 on a

Beverage Dispenser

Problem

Harvest Assist

Provides consistent ICE production 24/7 for the life of the

machine, while reducing operating costs

PURE ICE

Exclusively by ICE-O-Matic

Built-in antimicrobial protection for the life of the machine

prevents bacteria and slime fungus growth. ICE-O-Matic’s

optional water filteration system provides protection

against unpleasant tastes, odors and scale formation.

Sea Salt Corrosion Proctection

All remote condensers are coated with a salt air corrosion

protection – FREE

ICE-O-Matic

is the Best ICE Making Solution for:

Hard Water, Food Safety and Tight Spaces

ICE 1506 Series

Cube ICE Maker

Solution

Hard Water

Scaling due to hard water slows ICE

Making production

Food Safety

Food safety concerns about slime- and

odor-causing bacteria

Corrosion

Salt air corrosion of outdoor equipment

located in coastal regions

✓ Produces up to 1431 lbs. (650 Kgs.)* of ICE per day

✓ Constructed from sturdy, corrosion-resistant

300 series stainless steel

✓ Only 30” wide

✓ Available with a remote condenser

*Rated at 70 °Air / 50° Water

Dirty Air Filter

Forget to change the air filter?

Filter-Free Air

No air filter to change

ICE 1506HR Remote 1431 (650) 1202 (546) 20.26 (76) n/a 5.5 20050 208-230/60/1 3 27.4 30 300 (136)

LRC-2661 Remote Condenser for 1 model ICE 1506R (208-230/60/1 voltage) 100 (46)

RT-325-404 25 ft. (7.6m) Precharged Tubing Kit for R-404A models 13 (6)

RT-340-404 40 ft. (12m) Precharged Tubing Kit for R-404A models 18 (8)

RT-345-404 45 ft. (13.7m) Precharged Tubing Kit for R-404A models 19 (9)

RT-360-404 60 ft. (18.2m) Precharged Tubing Kit for R-404A models 23 (12)

ICE 1506

Conds. Air Temp. Water Temp. °F (°C)

Unit °F (°C) 80°(27°) 70°(21°) 50°(10°)

90° (32°) 1118 (508) 1202 (546) 1294 (588)

80° (27°) 1152 (523) 1238 (563) 1362 (619)

70° (21°) 1210 (550) 1301 (591) 1431 (650)

1. 90°/70° figures are rated in accordance with

ARI Standard 810. All remaining points are

mathematical estimates.

2. All specifications and performance data are

subject to normal manufacturing variances.

ICE-O-Matic 11100 E. 45th Avenue, Denver, CO 80239

Tel. 303 371-3737 Fax. 303 371-6296 www.iceomatic.com

We reserve the right to make changes in design and construction at any time

without obligation.

2004© ICE-O-Matic Rev Code: 1019B-05/04-SS

Remote

Cooled

Water Used-Gals. (Lits.) Kilowatts

ICE Production ICE Production per 100 lbs. of ICE Used per

per 24 hrs. at per 24 hrs. at 90° Air/70° Water 100 lbs. of Ice Min. Max. Shipping

Model Cond. 70° Air/50° Water 90° Air/70° Water 90° Air Voltage No. of Circuit Fuse Weight

No. Unit lbs. (Kgs.) lbs. (Kgs.) 70° Water Btuh Characteristics Wires Amp. Size lbs. (Kgs.)

ICE Prod. Cond.

Use Use

60 Hz

ORDERING AND SPECIFICATION INFORMATION

OPERATING LIMITS

Ambient Temp. Range

Remote -20° - 120°F (-29° - 49°C) 60Hz

Water Temp. Range 40° - 80°F (4.5° - 27°C)

Water Pressure ICE Maker Min. 20 psi (1.4 bar)

Water in Max. 60 psi (6.9 bar)

ICE PRODUCTION CHART POUNDS

(KILOGR

AMS) PER

24 HOURS

Ice Cube Dispense Area

7/8" Holes For Electrical

Connections

Ice Maker Potable

Water In 3/8" FPT

Ice Maker Water

Out 3/4" FPT

2.41

11.58

1.09

10.06

13.06

15.56

22.06

Discharge Line 1/2" Male Quick Connect Coupling For

Use With RT-325-404 or RT-340-404 Precharge Line Set

Liquid Line 3/8" Male Quick Connect Coupling For

Use With RT-325-404 or RT-340-404 Precharge Line Set

Rear of Machine

2 x 3.29

2 x 1.10

2 x 2.00

2 x 19.50

Ice Maker Potable

Water In 3/8"

Ice Maker Potable Water In 3/8"

(Optional)

Ice Maker Water Out 3/4" FPT

(Optional)

Minimum Wall Clearance

6.00

2 x 4.50

Top View

30.28

Rear of Machine

5.12

20.00

22.05

Hardware For Strap

Mounting To Bin Located

Underside Of Ice Maker

Ice Cube Dispense Area

R.H. Side View

25.61

28.36

22”

(589 mm)

30”

(762 mm)

28 1/2”

(724 mm)

Dimensions

NOTES

The ICE 1506 must be ordered with the LRC 2661

Remote Condenser. The ERC 2661 is not compatible.

Half Cube

7/8" x 7/8" x 3/8"

(22mm x 22mm x 10mm)

Full Cube

7/8" x 7/8" x 7/8"

(22mm x 22mm x 22mm)

Ice-O-Matic ICE1506 Series User manual

Brand: Ice-O-Matic

Model: ICE1506 Series

Category: Ice cube makers

Type: User manual

Download PDF

report

Ice-O-Matic ICE1506 Series User manual

Ice-O-Matic ICE1506 Series User manual

Related papers

Other documents