®
EF 800 Series
Flake ICE Maker
EF 800
Problem
Multiple Solutions
Storage of 143 pounds, 213 pounds or
315 pounds of flaked ICE
ICE-O-Matic is the Best ICE Making Solution for:
Hard Water, Food Safety and Tight Spaces
Solution
Optimal Bin Storage
Bin not large enough?
✓ Produces up to 752 lbs. (342 Kgs.)* of ICE per day
✓ Constructed from sturdy, corrosion-resistant
stainless steel
✓ Ultra-low profile - 41 inches (1041 mm) tall
✓ Available with an air-cooled condenser
Tight-Fitting Spaces
Kitchen space utilization
Maximum ICE
Maximum ICE production in a minimum amount of space
with an ultra-low profile:
• 41 inches tall
• Air intake only on one side
• Choice of 32, 38 or 48 inches wide
ICE-O-Matic Tough
Constructed with a brass evaporator and rugged stainless
steel transport system enclosed in polyurethane insulation
Operating Environments
Built to last?
Dirty Air Filter
Forget to change the air filter?
Filter-Free Air
No air filter to change
*Rated at 70°F (21°C) Air / 50°F (10°C) Water
EF800A38S 38 (965) 213 (97) Air 752 (342) 588 (267) 12.0 (45) n/a 4.9 7277 115/60/1 3 18.2 20 290 (132)
EF800A48S 48 (1219) 315 (143) Air 752 (342) 588 (267) 12.0 (45) n/a 4.9 7277 115/60/1 3 18.2 20 325 (148)
Please note: air-cooled units require 6” (152 mm) clearance for air intake and exhaust.
* Bin storage capacity based on 34 LB/ CU.FT. @ 90% of volume
Water Used-Gals. (Lits.) Kilowatts
ICE Production ICE Production per 100 lbs. of Ice used per
*Application per 24 hrs. at per 24 hrs. at 90° Air / 70° Water 100 lbs. of ICE Heat of Min. Max. Shipping
Model Cab Size Bin Storage Cond. 70° Air / 50° Water 90° Air / 70° Water 90° Air rejection Voltage No. of Circuit Fuse Weight
No. Width ”(mm) Lbs. (Kgs.) Unit lbs. (Kgs.) lbs. (Kgs.) 70° Water Btuh Characteristics Wires Amp. Size lbs. (Kgs.)
ICE Prod. Cond.
Use Use
60 Hz
ORDERING AND SPECIFICATION INFORMATION
OPERATING LIMITS
Ambient Temp. Range
Air 50° - 110°F (10° - 43°C)
Water Temp. Range 40° - 100°F (4.5° - 38°C)
Water Pressure Ice Maker Min. 20 psi (1.4 bar)
Water in Max. 60 psi (4.9 bar)
EF 800
Conds. Air Temp. Water Temp. °F
Unit °F (°C) 80°(27°) 70°(21°) 50°(10°)
90° (32°) 547 (249) 588 (267) 654 (297)
80° (27°) 594 (270) 639 (290) 703 (319)
70° (21°) 636 (289) 684 (311)
752 (342)
All specifications and performance data are subject to
normal manufacturing variances.
ICE PRODUCTION CHART POUNDS
(KILOGRAMS) PER 24 HOURS
Air
Cooled
EF800 Series Flake ICE Maker Self-Contained
ä
28"
(711mm)
EF32, 38
side view
ää
1.50"
(38mm)
Electrical Inlet
Icemaker Water Inlet
3
/8" FPT
Condenser Water Inlet
3
/8" (10mm) O.D. Copper Tubing
(Water Cooled)
Condenser Drain
3
/8" (10mm) O.D. Copper Tubing
(Water Cooled)
Drain
1
/2" (13mm) I.D. Plastic Tubing
ä
ä
ä
ä
ä
32”, 38”, 48” side view
Dimensions and Air Flow
ä
ä
ä
ä
ä
ä
ä
ä
ä
ä
ä
ä
27"
(686mm)
ä
ä
ä
ä
ä
ä
ä
ä
38"
(965mm)
ä
ä
ä
ä
Bin Drain
3
/4" (19mm)-
FPT
ä
28"
(711mm)
ää
1.50"
(38mm)
Electrical Inlet
Icemaker Water Inlet
1
/4" Male Flare
Condenser Water Inlet
3
/8" O.D. Copper Tubing
(Water Cooled)
Condenser Drain
3
/8" O.D. Copper Tubing
(Water Cooled)
Drain
5
/8" I.D. Plastic Tubing
ä
ä
ä
ä
ä
3"
(76mm)
6.75"
(172mm)
8"
(203mm)
27"
(686mm)
32.25"
(819mm)
3
/4"
(19mm)
1.75"
(45mm)
35"
(889mm)
41"
(1041mm)
EF38
back view
EF38
front view
6" (152mm)
to 7" (178mm)
Adj. Legs
38” front view
ä
ä
ä
ä
ä
ä
ä
ä
ä
ä
ä
ä
27"
(686mm)
ä
ä
ä
ä
ä
ä
ä
ä
38"
(965mm)
ä
ä
ä
ä
Bin Drain
3
/4" (19mm)-
FPT
ä
28"
(711mm)
ää
1.50"
(38mm)
Electrical Inlet
Icemaker Water Inlet
1
/4" Male Flare
Condenser Water Inlet
3
/8" O.D. Copper Tubing
(Water Cooled)
Condenser Drain
3
/8" O.D. Copper Tubing
(Water Cooled)
Drain
5
/8" I.D. Plastic Tubing
ä
ä
ä
ä
ä
3"
(76mm)
6.75"
(172mm)
8"
(203mm)
27"
(686mm)
32.25"
(819mm)
3
/4"
(19mm)
1.75"
(45mm)
35"
(889mm)
41"
(1041mm)
EF38
back view
EF38
front view
6" (152mm)
to 7" (178mm)
Adj. Legs
38” Width
38"
(965 mm)
Air in -
Left side of ICE Maker
28”
(711 mm)
41”
(1041 mm)
Air out -
front of ICE Maker
48” front view
48” back view
ä
ä
ä
ä
48"
(1219mm)
ä
ä
ä
6"(152mm)
to 7" (178mm)
Adj. Legs
35"
(889mm)
41"
(1041mm)
48” Width
48"
(1219 mm)
Air in-
Left side of ICE Maker
28”
(711 mm)
41”
(1041 mm)
Air out -
front of ICE Maker
ä
ä
ä
ä
ä
ä
ä
ä
ä
ä
ä
ä
32"
(813mm)
ä
ä
ä
ä
ä
Bin Drain
3
/4"(19mm)-FPT
27"
(686mm)
32.25"
(819mm)
3
/4"
(19mm)
1.75"
(45mm)
3"
(76mm)
6.75"
(172mm)
8"
(203mm)
I
S
O
9
0
0
1
C
E
R
T
I
F
I
E
D
fi
We reserve the right to make changes in design and construction at any time
without obligation.
2006 ©ICE-O-Matic Spec Sheet No: 2002 Rev:
C-06/06-TW
ICE-O-Matic 11100 E. 45th Avenue, Denver, CO 80239
Tel. 303 371-3737 Fax. 303 371-6296 www.iceomatic.com
®
38” back view
/
