2. Phonak
  3. ActiveVent Receiver
ActiveVent Receiver

Phonak ActiveVent Receiver Operating instructions

  • Hello! I've reviewed the assembly instructions for the Phonak ActiveVent receiver, SlimTip Titanium AV shell, SlimTip Link AV tube, and HF3 wax filter. The document details the steps for correctly assembling these components. I am ready to assist you with any questions you have regarding this guide or the products described within.
  • What are the necessary items for assembly?
    How do I insert the SlimTip Link AV tube into the shell?
    How to install ActiveVent receiver?
Phonak
ActiveVent™ Receiver
Assembly instructions
Necessary items
Inserting SlimTip Link AV
1. ActiveVent receiver: MAV left
(blue) or right (red)
2. Shell: SlimTip Titanium AV
3. Tube: SlimTip Link AV
4. HF3 wax lter: left (blue) or right
(red), incl. lter changing tool
5. Cutting tool, e.g. cutting tweezers
6. Receiver handling tool
2. Pull and wiggle the tube into the
shell until it pops into position.
1. Insert the tube (SlimTip Link AV)
into the shell (SlimTip Titanium AV).
4
125
3
6
Inserting ActiveVent (MAV)
receiver into SlimTip Titanium AV
1. Insert the ActiveVent receiver
into the handling tool. Use the
handle labeled “MAV”.
2. Push the receiver into the tube
in the shell until resistance is felt.
3. The receiver spout should be
aligned with the ring of the tube.
3. Cut the tube as close and at
as possible to the ring.
4. Finished SlimTip Titanium AV
shell with SlimTip Link AV.
029-1156-02/V2.00/2021/craft © 2021 Sonova AG All rights reserved
/