2. Angelo Decor
  3. AD93699

Angelo Decor AD93699 Operating instructions

  • Hello! I'm here to help you with your Angelo Decor Fountain. I've reviewed the user manual for the AD93699 model, and I understand it includes steps for assembling the fountain, connecting the pump, and installing an optional fire feature. The manual also provides recommendations for water levels and electrical connection. Feel free to ask any questions you might have about setting up or using your fountain.
  • What should I do if I have issues with the fountain?
    How full should I fill the fountain with water?
Thank you for buying an Angelo Decor Fountain!
We hope you will find these instructions helpful in setting up your fountain.
If
y
ou have an
y
issues with this item, please DO NOT return the unit to place of purchase.
Please visit our web site, www.an
g
elodecor.com, for assistance and warrant
y
information.
First unpack carton carefully, arranging parts safely in your working area.
Arrange all parts in your working Feed the pump cord through the Install the cord pipe cover by fitting
area. cord pipe as shown above. the rubber cap over the pipe.
Align the cord with the groove Feed the tubing from Place the top piece on to the
at the base. the top section through middle section by aligning the slip
the opening of the middle mechanism as illustrated .
section as shown.
Now place the
combined sections on
the edge of the bowl.
Connect the pump to
the tubing and lower
the combined pieces
into place.
Y
our fountain includes an optional
fire feature which should be
installed as shown to the left.
Please use EXTREME CAUTION
when using this device and follo
w
all cautions and warnings
included with this device.
Final assembly should look like this
Now simply fill with clean water and plug into a grounded GFCI outlet
We recommend keeping bowl 3/4 full of water to avoid pump burnout.
/