Angelo Decor AD91213 Operating instructions

Brand: Angelo Decor

Model: AD91213

Type: Operating instructions

Below you will find brief information for AD91213. This document provides instructions for setting up your Angelo Decor fountain. It covers unpacking, arranging components, connecting cords and tubing, and adjusting water flow. The final assembly should look like the image provided, and recommends filling the bowl 3/4 full with clean water.

Thank you for buying an Angelo Decor Fountain!

We hope you will find these instructions helpful in setting up your fountain. If you need more

information to properly care for your fountain, please DO NOT return the unit to place of purchase.

Please visit our web site, www.angelodecor.com, for assistance and warranty information.

First unpack carton carefully, arranging parts safely in your working area.

Pump cord through standpipe Run cord down pedestal and align cord with Connect the bowl

groove at base. to the base

Connect tubing with Adjust pump to the Connect tubing to the pump Adjust the restrictor to desired

T joint desired setting water flow

The final assembly should

look like this

Twist and lock top to the

bowl

Now simply fill with clean water and plug into a grounded GFCI outlet

We recommend keeping bowl 3/4 full of water to avoid pump burnout.

Angelo Decor AD91213 Operating instructions

Angelo Decor AD91213 Operating instructions

Angelo Decor AD91213 Operating instructions

Related papers

Other documents