Lindab Transfer is a versatile and efficient duct system designed for various applications, including comfort ventilation, extraction systems for improved working environments, and particle transport in industries like sawmills and furniture manufacturers. Its key features include:
- Easy assembly with clamp, screw, or flange joints, ensuring a secure and airtight connection.
- Flexible hose option for connecting to existing ductwork or equipment.
- Durability and low maintenance requirements, making it a reliable solution for long-term use.
Lindab Transfer is a versatile and efficient duct system designed for various applications, including comfort ventilation, extraction systems for improved working environments, and particle transport in industries like sawmills and furniture manufacturers. Its key features include:
- Easy assembly with clamp, screw, or flange joints, ensuring a secure and airtight connection.
- Flexible hose option for connecting to existing ductwork or equipment.
- Durability and low maintenance requirements, making it a reliable solution for long-term use.
Lindab Transfer
Mounting instructions
lindab | we simplify construction
2
Duct systems
Transfer
Areas of application
The Transfer duct system is used to advantage for comfort ventilation, extraction systems for improved
working environments, particle transport within timber industries, e.g. sawmills, joineries, furniture manu-
facturers, woodwork rooms, and plasma cutting facilities.
Contact your supplier if other areas of application or transport of other materials are required, or if special
operating conditions apply.
Assembly
The following types of joint are available:
• Clamp with handle SB, SB1
(as standard for Ø ≤ 500 mm)
• Clamp with screw SB–2
(as standard for Ø ≤ 500 mm)
• Flange FL
(only as standard for Ø > 500 mm)
• Flexible hose Hose clamp (MDC)
Clamp SB, SB1 or SB-2
First thread the clamp over the entire bulge of one end and in over the duct.
Then position both bulges next to one another and put the strap back over both bulges.
Ensure that the ends of the gasket are not twisted. Then tighten the strap.
Locking pin, which secure the strap against unintentional opening, is available as an accessory.
Flange
Place the flanges next to one another, possibly with sealant or sealing compound between them if
air-tightness class C applies. Then tighten the screws alternately.
Flexible hose
Fasten the hose clamp behind the bead.
Suspension
The number of suspension positions and the distances between them must be determined to ensure
there is no deflection of the duct system.
We reserve the right to make changes
2021-07-16
3
Safety
Dust and shaving extraction systems must be designed to minimise potential fire or explosion risks.
More information about these risks can be found in: Draft of CE standard from CEN/TC 142/WG 10
‘Chips and dust extraction systems’
Maintenance
The duct system normally doesn’t requires any maintenance but a regular check of wear and tear
should be performed.
Duct systems
Transfer
We reserve the right to make changes
2021-07-16
www.lindab.com
At Lindab, good thinking is a philosophy that
guides us in everything we do. We have made it
our mission to create a healthy indoor climate –
and to simplify the construction of sustainable
buildings. We do that by designing innovative
products and solutions that are easy to use, as
well as offering efficient availability and logistics.
We are also working on ways to reduce our impact
on our environment and climate. We do that by
developing methods to produce our solutions using
a minimum of energy and natural resources, and
by reducing negative effects on the environment.
We use steel in our products. It’s one of few
materials that can be recycled an infinite number
of times without losing any of its properties. That
means less carbon emissions in nature and less
energy wasted.
We simplify construction
-
1
-
2
-
3
-
4
Lindab Transfer is a versatile and efficient duct system designed for various applications, including comfort ventilation, extraction systems for improved working environments, and particle transport in industries like sawmills and furniture manufacturers. Its key features include:
- Easy assembly with clamp, screw, or flange joints, ensuring a secure and airtight connection.
- Flexible hose option for connecting to existing ductwork or equipment.
- Durability and low maintenance requirements, making it a reliable solution for long-term use.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
hasman Two Day Lindab Fire Damper Operating instructions
-
Vents KPD, KPDU User manual
-
-
LNS FOX WS 2 1020 Instruction And Installation Manual
-
Seeley AIRA ATH50DL Installation, Operation & Service Manual
-
Plymovent WallPro User manual
-
-
South bend SB1101 Owner's manual
-
Kaysun arc duct User manual
-
Axminster Trade Series User manual
