3
P1 RxTx
P2 RxTx
P/B
B 50
A 51
N 52
E 53
P
1
P
2
B 60
A 61
N 62
E 63
DI1 71
DI2 72
DI3 73
DI4 74
DI5 75
DI6 76
DI7 77
DI8 78
Agnd 90
AO1 91
AO2 92
AO3 93
AO4 94
AO5 95
Ext.
Disp.
REGULA MASTER
1 G +
2 G0 -
3
4 +C
10 GDO
11 DO1
12 DO2
13 DO3
14 DO4
15 DO5
16 DO6
17 DO7
30 Agnd
31 AI1
32 AI2
33 Agnd
34 AI3
35 AI4
40 Agnd
41 UI1
42 UI2
43 Agnd
44 UI3
45 UI4
RM
TCP/IP
Lindab reserves the right to make changes without prior notice
2020-09-07
lindab | we simplify construction
Lindab Pascal Operate
Get started with Pascal Operator
Items you need:
• PC with HTML5 web browser, like Chrome, Firefox, Edge or Safari.
• Router with DHCP server / or providing static IP adresses.
• Ethernet cables
1. Connect your router
Connect your router to PC and to Regula Master.
Regula Master will get a IP-address, which is visible in the top main display menu by pressing right arrow. If you connect
to an internal network you just connect to the network (via Wi-Fi or cable).
In many cases a static IP address is needed from the local network. To get this the local IT-support must be involved.
The static IP is set manually on the RM with push buttoms.
Menu: Configuration-> Communication-> TCP/IP-> Set static IP
2. Open web browser
Open web browser and type in the IP-address of the Regula Master.
* NOTE ! All Regula Master commes with same PLA:ELA from factory. Change these before starting setup. It is
possible to do in three ways.
• From display. In the top main menu click right arrow twice and change. Do this on all RM.
• From IP login to all Regula Masters, in settings.
• With Application loader.
Example: Global RM: 123:123
Local RM 1: 1:1
Local RM 2: 2:2
Get connected
Router PC
Regula Master HTML