Lexmark MS810n Moving Manual

MS810n
Lexmark
Brand
Lexmark
Model
MS810n
Type
Moving Manual

This manual is also suitable for

Lexmark MS810n is a high-performance monochrome laser printer designed for small to medium-sized businesses. It offers fast print speeds of up to 61 pages per minute, automatic duplex printing, and a large paper capacity of up to 2,300 sheets. With its intuitive touchscreen display and built-in wireless connectivity, the Lexmark MS810n is easy to use and can be integrated seamlessly into your existing network. Additionally, its advanced security features help protect your sensitive data and documents.

Lexmark MS810n is a high-performance monochrome laser printer designed for small to medium-sized businesses. It offers fast print speeds of up to 61 pages per minute, automatic duplex printing, and a large paper capacity of up to 2,300 sheets. With its intuitive touchscreen display and built-in wireless connectivity, the Lexmark MS810n is easy to use and can be integrated seamlessly into your existing network. Additionally, its advanced security features help protect your sensitive data and documents.

Moving Guide
Before moving the printer
CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or printer
damage:
• Turn off the printer, and then unplug the power cord from the electrical outlet.
• Disconnect all cords and cables from the printer.
• If two or more optional finishers are installed, then remove the finishers individually from the printer.
Notes:
– Make sure to remove the topmost finisher first.
– To remove the finisher, hold the finisher on both sides, and then lift the latches to unlock the finisher.
• If the printer does not have a caster base but is configured with optional trays, then remove the trays.
Note: Slide the latch on the right side of the optional tray toward the front of the tray until it clicks into place.
Moving Guide
Page 1 of 3
• Use the handholds located on both sides of the printer to lift it.
• Make sure your fingers are not under the printer when you set it down.
• Make sure there is adequate clearance around the printer.
• Use only the power cord provided with this product or the manufacturer's authorized replacement.
Warning—Potential Damage: Damage to the printer caused by improper moving is not covered by the printer warranty.
Selecting a location for the printer
CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained
personnel to lift it safely.
When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan to install any options,
then leave enough room for them also. It is important to:
• Set up the printer near a properly grounded and easily accessible electrical outlet.
• Make sure airflow in the room meets the latest revision of the ASHRAE 62 standard or the CEN Technical Committee 156
standard.
• Provide a flat, sturdy, and stable surface.
• Keep the printer:
– Clean, dry, and free of dust.
– Away from stray staples and paper clips.
– Away from the direct airflow of air conditioners, heaters, or ventilators.
– Free from direct sunlight and humidity extremes.
• Observe the recommended temperatures and avoid fluctuations:
Ambient temperature 15.6°C – 32.2°C
Storage temperature 10°C – 43.3°C
Moving Guide
Page 2 of 3
• Allow the following recommended amount of space around the printer for proper ventilation:
1
2
3
4
5
1 Right side 305 mm (12 in.)
2 Front 508 mm (20 in.)
3 Left side 305 mm (12 in.)
4 Rear 305 mm (12 in.)
5 Top 115 mm (4.5 in.)
Moving the printer to another location
The printer and its hardware options can be safely moved to another location by following these precautions:
• Any cart used to move the printer must have a surface able to support the full footprint of the printer.
• Any cart used to move the hardware options must have a surface able to support the dimensions of the hardware options.
• Keep the printer in an upright position.
• Avoid severe jarring movements.
Shipping the printer
When shipping the printer, use the original packaging or call the place of purchase for a relocation kit.
Moving Guide
Page 3 of 3
  • Page 1 1
  • Page 2 2
  • Page 3 3

Lexmark MS810n Moving Manual

MS810n
Lexmark
Brand
Lexmark
Model
MS810n
Type
Moving Manual
This manual is also suitable for

Lexmark MS810n is a high-performance monochrome laser printer designed for small to medium-sized businesses. It offers fast print speeds of up to 61 pages per minute, automatic duplex printing, and a large paper capacity of up to 2,300 sheets. With its intuitive touchscreen display and built-in wireless connectivity, the Lexmark MS810n is easy to use and can be integrated seamlessly into your existing network. Additionally, its advanced security features help protect your sensitive data and documents.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents