Altronix HubWayEX1 Active UTP Transceiver Module
employs automatic gain control (AGC) to transmit UTP video
and RS422/RS485 data o
ver a single CAT-5 or higher structured
cable. Unit provides a single camera channel in a compact insu-
lated housing. Video transmission range is up to one (1) mile
max.
Input:
• 16VAC-24VAC or 12VDC-24VDC, 1W.
These products shall only be powered by a UL Listed
Class 2 power Supply or Class 2 transformer.
Video:
• One (1) channel of video over twisted pair up to
a distance of 5000 ft.
• Active balun combiners not required.
• One (1) 75 ohm video output.
Data:
• RS422/RS485 data input.
Visual Indicators:
• Video signal LED indicator.
Features:
• Automatic picture and gain control.
• Automatic compensation for reverse polarity
wiring (video).
Shipping Weight (approximate):
- HubWayEX1: 0.5 lbs.
HubWay
®
EX1 - Active UTP Transceiver Module
Rev. DSHubWayEX1 - D20J
Overview
Specifications
UL Listed for Commercial CCTV Equipment (UL 2044).
Agency Approvals
Video output
to head end
equipment
(DVR).
Spring terminal block
for RS422/RS485 input
from head end equipment
(DVR) for PTZ control.
CAT-5 or higher structured
cable to Video/Balun Combiner
at camera.
Video
UL Listed for Commercial CCTV Equipment
(UL 2044). CUL Listed - CSA Standard C22.2
No. 1-04, Audio, Video and Similar Equipment
AC/DC
Input Video Channel Data
HubWayEX1
Single Channel Active UTP Transceiver Hub
Input 16-24VAC, 1W
12-24VDC, 1W
Class 2 wiring to be used.
www.altronix.com
UL Listed
Class 2
power Supply
or Class 2
transformer
Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com
/
