Altronix new HubSat4Di Passive UTP Transceiver Hub w/Integral
Isolated Camera Power transmits UTP video, RS422/RS485 data and
power over a single CAT-5 or higher structured cable. Unit provides 4
camera channels in a wall mount enclosure. Video transmission
range is up to 750 ft. max. per channel. Units are compatible with
AC and/or DC fixed or PTZ cameras when utilizing Altronix
HubWayAv, HubWayDv, or HubWayDvi Video Balun/Combiners.
In addition, the unit features 24VAC or 28VAC PTC protected
outputs and surge suppression. Optionally, the HubSat4Di can be
used as an accessory module to transmit video from up to 4
cameras over a single CAT-5 or higher structured cable back to the
HubWay, HubWayLD or HubWayLDH Passive and Active UTP
Transceiver Hubs. In addition, the HubSat4Di powers
these cameras locally to eliminate the possibility
of voltage drop associated with long cable runs.
HubSat
®
4Di Passive UTP Transceiver Hub
with Integral Isolated Camera Power
Rev. DSHubSat4Di - K13I
Overview
Input:
• 115VAC 50/60Hz, 1.25 amp.
• Primary fuse is rated at 3.5 amp/250V.
Video:
• Four (4) channels of video over twisted pair
up to 750 ft.
• Four (4) 75 ohm video outputs.
Data:
• RS422/RS485 data inputs.
Power:
• Individually selectable 24VAC or 28VAC power
outputs with OFF position.
• Unit provides up to 1 amp max. per channel not to
exceed a total of 4 amp (100VA) maximum current.
• Electronically isolated camera power.
• PTC protected outputs.
• PTCs are rated @ 1 amp per channel.
• Surge suppression.
Visual Indicators:
• Four (4) individual power LED indicators.
Features:
• Wall mount enclosure.
Accessories:
• Video Balun/Combiners:
- HubWayAv - for use with 24VAC cameras.
- HubWayDv - for use with 12VDC cameras.
- HubWayDvi - for use with 12VDC
cameras without isolation.
Shipping Weight (approximate):
- HubSat4Di: 8.0 lbs.
- HubSat42Di: 8.5 lbs.
- HubSat43Di: 8.7 lbs.
HubSat4Di
Passive UTP Transceiver Hub
with Inte
gral Isolated Camera Power.
Video Balun/Combiners not included.
HubSat42Di
Passive UTP Transceiver Hub
with Inte
gral Isolated Camera Power
Includes four (4) HubWayAv Video Balun/Combiners.
HubSat43Di
Passive UTP Transceiver Hub
with Inte
gral Isolated Camera Power
Includes four (4) HubWayDv Video Balun/Combiners.
Specifications
Models
Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com
Enclosure Dimensions
8.5”H x 7.5”W x 3.5”D
PVD1
VIDEO1 VIDEO2 VIDEO3 VIDEO4
PVD2 PVD3 PVD4
+ DATA -
DATA 1-4 VIDEO 1-4
28VAC
2
4VAC
28VAC
2
4VAC
28VAC
2
4VAC
28VAC
2
4VAC
OFF
OFF
OFF
OFF
AUX1 AUX2 AUX3 AUX4
LED1
LED2
LED3 LED4
XFMR
BK
24(YL)
0 (Br)
White
Lead
Black
Lead
HubWayAv
• Compatib
le with HubWay
®
,
HubWay
®
LD and HubSat
®
UTP
Transceiver Hubs for use with
24VAC cameras.
HubWayDv
• Compatib
le with HubWay
®
,
HubWay
®
LD and HubSat
®
UTP
Transceiver Hubs for use with
12VDC cameras.
HubWayDvi
• Compatib
le with HubWay
®
,
HubWay
®
LD and HubSat
®
UTP
Transceiver Hubs for use with
12VDC cameras without isolation.
Vidoe Balun/Combiners
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Altronix HUBSAT42D Datasheet
-
-
-
-
-
-
-
-
-
Altronix HubWayLD163D Installation guide
Other documents
-
Hubway LD8CD Installation guide
-
Hubway HubWayCD Series Passive UTP Transceiver Hubs Installation guide
-
Altronics HUBWAYH16 Installation guide
-
SECO-LARM USA ST-UVDA-W180Q User manual
-
SECO-LARM ST-2424-W100Q Owner's manual
-
SECO-LARM USA ST-2406-10A User manual
-
SECO-LARM ST-UVDA-W180Q Owner's manual
-
-
ENFORCER ST-UVDA-W180Q Installation guide
