Audio Resource Group ARG-OM-003 Manual & User Manual

Brand: Audio Resource Group

Model: ARG-OM-003

Type: Manual & User Manual

ARG-OM-003

2.4GHz Receiver

Manual & User Guide

FITNESS ENTERTAINMENT SOLUTIONS

www.argaudio.com

Ave

anna

ord

ND 5844

888.468.4552

Audio Resource Group, Inc.

Page 1

www.argaudio.com

2.4GHz AUDIO RECEIVER MANUAL

2.4 GHz Receiver Diagram

2.4GHz Receiver Line Input Displays

D-1 Display: Standby

D-2 Display: Working

D-3 Display: Mute

1. Display

2. Channel Up Buon

3. Channel Down Buon

4. Volume Up Buon

5. Volume Down Buon

6. Mute Buon

7. C-SAFE Port

8. Auto Power On/O and 3.5mm Stereo Audio Jack

9. Channel Number

10. Volume Number

MOUNTING INSTRUCTIONS:

The ARG 2.4GHz Receiver is a universal unit designed to be compable with most makes and models of

cardio equipment. To mount the Receiver:

1. Determine the appropriate locaon to mount the receiver to the cardio equipment. Take note the

range of moon of the components of machine and make sure the placement of the receiver and

its cabling will not interfere with operaon of the machine or any safety features.

2. Slide the cable es through the appropriate holes in the mounng cleat on the underside of the

receiver. (Top to boom if you are mounng it to a horizontal bar or side to side if you are

mounng to a vercal bar.)

3. Wr

ap and thread the cable es around the bar on the cardio machine at the pre-determined

locaon. Pull the es ghtly around the bar so the receiver does not move or rotate. Be careful

not to over-ghten the es to avoid cracking the mounng cleat or receiver case. Trim o the

excess ends of the cable es.

4. Connect the power cable to the receiver. The receiver can be powered by either a C-SAFE

power

outlet on the cardio machine or an A/C power converter that is plugged into the wall/floor.

(Power adapters and cables are not included and must be ordered separately.) If you are using a

C-SAFE connecon: connect one end of the Cat-5 cable to the C-SAFE port on the cardio machine.

(Check with the equipment manufacturer to make sure the machine has this feature and for

locaon of the outlet.) The other end of the cable connects to the RJ45 receptacle on the back of

the receiver. If you are using an A/C power supply: locate a standard 110V outlet and plug the 12V

A/C adapter side into the outlet and the RJ45 plug into the receptacle on the back of the receiver.

Make sure to route the cord for either opon appropriately to avoid interference with any of the

funcons or safety features of the cardio machine.

Audio Resource Group, Inc.

Page 2

www.argaudio.com

2.4GHz AUDIO RECEIVER MANUAL

OPERATING INSTRUCTIONS:

POWER ON/OFF:

The receiver is powered on and o by inserng the headphone plug into the headphone jack.

When you plug the headphones in, the receiver will turn on. When you unplug the headphones,

the receiver will turn o aer several seconds.

SELECTING THE LISTENING CHANNEL:

The receiver will show the channel number it is tuned to on the le side of th

e LED display

(Diagram #9). Select the channel number for the receiver to “tune-to” by pressing the “CHANNEL

UP” (Diagram #2) or “CHANNEL DOWN” buon (Diagram #3) on the front of the receiver. The

“CHANNEL UP” buon will make the channel step up by one. The “CHANNEL DOWN” buon will

make the channel step down by one. There are a total of 14 channels to choose from.

ADJUSTING THE LISTENING VOLUME:

Press the “VOLUME UP” buon (Diagram #4) or “VOLUME DOWN” buon (Diagram #5) to raise

or lower the volum

e level. When the receiver is powered on, the volume will default to 07. The

volume can be set between the range 0 and 16.

Pressing the “MUTE” buon (Diagram #6) will mute the sound and the volume number will ash

in the display. Press the “MUTE” buon a second me to restore.

RESETTING THE RECEIVER:

The receiver is equipped with built-in, self-protecon circuitry that will acvate when receiving a

variety of electrical or environmental circumstances. This may cause the unit to lock-up or

behave in an undesired fashion. If this occurs, reset the receiver by disconnecng it from the

power source for one minute. This will restart the soware and should return the unit to normal

operaon. If problems persist, please contact your dealer or ARG for further assistance.

Audio Resource Group, Inc.

Page 3

www.argaudio.com

2.4GHz AUDIO RECEIVER MANUAL

HEADPHONE JACK REPLACEMENT:

Due to heavy use, it is normal for the contacts in the headphone jack assembly to wear out over

me. The ARG 2.4GHz receiver is equipped with a replaceable headphone jack module to resolve

this problem without replacing the enre unit. Under IDEAL condions, the headphone jack is rated

to last approximately 6,000 plug inserons and removals (cycles). The headphone

jack module can,

in most cases, be changed without removing the receiver unit from the cardio machine.

1. To remove the worn jack, locate the “arrow” on the tab of the jack module located on the

back side of the receiver toward the boom.

2. Press on the “arrow” and slide the module in the direcon of the “arrow”.

3. To install the new module, guide the grooves of the jack module into the tabs of

the receiver.

4. Push the module back into the receiver unit unl it “clicks” into place.

WARRANTY

Audio Resource Group, Inc. provides ONE year warranty from the purchase date on receivers. During the warranty

period, if the material and workmanship is determined to be defecve by our repair center, ARG will:

(1) repair the product with new or rebuilt parts; or

(2) replace the product at no charge with new or rebuilt comparable products or parts

This warranty does not cover cosmec damage of

the product or if the serial number or model number axed to

the product has been removed, defaced, changed, altered or tampered with. This warranty does not cover

installaon or signal recepon problems.

Warranty only applies to the original buyer. Warranty is void if products have been damaged due to modicaon,

repair, or misuse by unauthorized personnel. ARG, Inc. is not liable, without limit

aon to any person or enty, for

any direct, incidental, consequenal damages or medical expenses caused by any use, defect, failure or malfuncon

of the product. The terms of the warranty are governed by the laws of the state of North Dakota, USA.

ARG will only accept returned products with prepaid shipping and a return authorizaon number. Contact ARG,

Inc. at 888-468-4552 for a return authoriz

aon number or for addional informaon.

MAIL to: SHIP to:

ARG, Inc. ATTN: Repair Department ARG, Inc. ATTN: Repair Department

PO Box 39 440 Ramsland Avenue

Hannaford, ND 58448 Hannaford, ND 58448

Phone: 888-468-4552 Fax: 888-373-4819 Phone: 888-468-4552 Fax: 888-373-4819

Email: [email protected] Email: [email protected]

Audio Resource Group ARG-OM-003 Manual & User Manual

Brand: Audio Resource Group

Model: ARG-OM-003

Type: Manual & User Manual

Download PDF

report

Audio Resource Group ARG-OM-003 Manual & User Manual

Audio Resource Group ARG-OM-003 Manual & User Manual

Related papers

Other documents