Savant DEMO-LMCUBE-00 Deployment Guide

Category
Floodlights
Type
Deployment Guide

Savant DEMO-LMCUBE-00 is a lighting demonstration kit that showcases the benefits and capabilities of Savant's lighting solutions. This portable kit includes a pre-configured Savant S2 Host, DMX controller, Recess 3 WRGB fixture, Netgear wireless router, and cabling for connectivity. With its easy setup and intuitive software, you can quickly integrate the kit into your existing Savant system or use it as a standalone demonstration tool.

Savant DEMO-LMCUBE-00 is a lighting demonstration kit that showcases the benefits and capabilities of Savant's lighting solutions. This portable kit includes a pre-configured Savant S2 Host, DMX controller, Recess 3 WRGB fixture, Netgear wireless router, and cabling for connectivity. With its easy setup and intuitive software, you can quickly integrate the kit into your existing Savant system or use it as a standalone demonstration tool.

DEMO-LMCUBE-00 Light Matters Portable Demo Kit Deployment Guide
PN: 009-1832-00 | 190418
Light Matters Demo Kit Getting Started
Congratulations on receiving your Savant / USAI
Lighting “Light Matters” Demo Kit. You are steps
away from demonstrating the benefits of this
exciting offering.
This demo can either be integrated into a fuller
experience with your other Savant solutions or
used standalone. The instructions below highlight
the steps required to make this fully functional.
What’s Included:
A) Light Matters Demo Cube
B) Finish Mosaic (See above)
C) Recess 3 WRGB Fixture and Driver (Installed)
D) Savant DMX Controller (Installed)
E) Savant S2 Host
F) Netgear Wireless Router
G) Cabling for Connectivity
Additional Materials:
H) Power Bar for Fixture, DMX Controller, Host, Router
I) Longer Ethernet Cable for Uplink to Internet
B
A
Top View of Cube
Rear View of Cube
C
D
Future Position of Router and S2 Host
DEMO-LMCUBE-00 Light Matters Portable Demo Kit Deployment Guide
PN: 009-1832-00 | 190418
Physical Setup & Wiring
Unbox and install the S2 Host and
Netgear Router on the keyhole mounts
located on the rear of the cube.
For setup purposes, connect the
Internet/WAN port of the Netgear
Router to an internet-connected
network.
Using the included ethernet cables,
connect both the DMX Controller and
S2 Host to LAN ports on the Netgear
router.
The DMX controller will need to update
its firmware over the internet during
this initial phase.
Connect all devices to power, starting
with the Router.
Unveil the Finish Mosaic from the
package and slide into the face of the
cube until it sits tight against the back
wall.
This will represent the main canvas of
your demonstration, but you can also
place other swatches and objects
within the cube to show the effect of
dynamic lighting.
F
E
Ethernet
& Power
DEMO-LMCUBE-00 Light Matters Portable Demo Kit Deployment Guide
PN: 009-1832-00 | 190418
Host Software Upgrade
In Savant Application Manager,
download the Runtime Installer for S2
Host and upgrade the software to 9.0.2
(or newer) with System Monitor.
While System Monitor is open, highlight
the host and use Command-C to copy
the UID.
DEMO-LMCUBE-00 Light Matters Portable Demo Kit Deployment Guide
PN: 009-1832-00 | 190418
Blueprint Configuration
For convenience, download and open
the sample configuration created in
version 9.0.2 of Blueprint before
moving forward.
Double-click on the Host to open
Inspector and paste the UID into the
appropriate field using Command-V.
In the same window, navigate to
Resources using the Show drop-down
menu. Ensure the Lighting Controller
Source is enabled.
Generate Services and navigate to
Manage Lighting on the far right on the
main menu bar.
Open the Discovery window by clicking
the side menu button (highlighted in
blue).
Click Discover to search for your DMX
Controller.
Right-click on the discovered controller
and “Add to Configuration”.
The DMX Controller will then be added
to the configuration in the second
information window.
DEMO-LMCUBE-00 Light Matters Portable Demo Kit Deployment Guide
PN: 009-1832-00 | 190418
Collapse the Discovery window by
clicking the side menu icon again.
With the DMX Controller selected,
choose Web Configure to launch the
OLA lighting configuration.
Navigate to Savant Lighting in the
Universes menu and select the RDM
tab at the top of the screen.
Click on the magnifying glass on the
left of the tool bar to discover the
various DMX devices, including your
demo fixture and the controller itself.
You may select the fixture and name it
under “Device Label” for later.
Click on “DMX Personality” and confirm
that it is set to RGBW.
Close the browser window when
finished.
DEMO-LMCUBE-00 Light Matters Portable Demo Kit Deployment Guide
PN: 009-1832-00 | 190418
Back in the Lighting Manager, click
Connect and Start Scan to import the
demo fixture into Blueprint.
Create a Smart Group using the +
button at the bottom of the screen and
drag your fixture into the group. The
final result is shown below.
Click Sync in the bottom right to
populate the Lighting Data table so the
fixture shows up in your app.
At a minimum, enable the Loads
checkbox and click Sync.
Close the data table, Generate Services,
Save and Upload to the Host.
DEMO-LMCUBE-00 Light Matters Portable Demo Kit Deployment Guide
PN: 009-1832-00 | 190418
Savant Pro App & TrueImage Setup
You may now connect to your
system from your Mobile device
using the WiFi Credentials marked
on the Netgear Router.
Open your Savant Pro App and
connect to the system, binding it to
your account.
Navigate to the Living Room
Lighting Service and access the
drawer for the Recess 3 Demo
fixture using the arrow on the right.
Tap on the Camera icon to walk
through the TrueImage setup of the
fixture so you can show this
dynamic feature within the app.
Once complete, you may want to
create some favorite color and
temperature settings to highlight
the range of the solution.
You may tap on the RGBW values
on the Slider interface to pull up a
view to make exact adjustments,
should you wish.
Save these as favorites using the +
in the top right of the screen or
capture them using Savant Scenes.
DEMO-LMCUBE-00 Light Matters Portable Demo Kit Deployment Guide
PN: 009-1832-00 | 190418
Demo Scene Examples
To properly demonstrate the capabilities of the Savant USAI fixtures, you
will want to create a few color favorites or scenes. Here are some examples
that you are welcome to adjust:
Scene Name
R, G, B, W
Scene Description
3000K Optimal
60, 40, 15, 255
Highlights a classic 3000K Fixture that would be a
standard offering.
3000K Dim
0, 0, 1, 20
Shows how traditional LED lighting maintains the same
color temperature, even in dim settings.
Warm Dim
20, 8, 0, 10
Introduces the Warm Glow technology, pioneered by
USAI, to make LED lighting emulate the look and feel of
incandescent.
Metal & Stone
0, 80, 45, 255
Cooler light temperature that makes these elements
crisp and elevates their presence in the space.
Wood & Fabric
250, 100, 0, 125
Warmer light temperature that embellishes the rich
tones of these finishes in the space.
Miami
255, 0, 40, 0
Showcases how lighting may be used to create a fun
atmosphere for special events, parties, etc.
Calm
30, 0, 180, 0
Calming scene that may be used for meditation or other
relaxation.
DEMO-LMCUBE-00 Light Matters Portable Demo Kit Deployment Guide
PN: 009-1832-00 | 190418
Sample Demo Script
Start with 3000K Optimal
Presenter:
Thank you all for coming today and taking time out of your schedules.
I’m ___________ the ___________ at __________.
We all recognize that lighting is going to be an important part of your
project(s), and typically any technology conversation only covers the
basic dimming of these fixtures via a lighting control system. Let’s
take a step back and explore the more basic question “Why does
quality light matter?”, “Why should you invest in quality light?”
Light is everywhere, Light is expected, Light is taken for granted….but
it doesn’t have to be.
Over 90 percent of residential projects do not have a lighting
designer on the project. It is typically an architect drawing circles on a
Reflected Ceiling Plan and handing that over to the Electrical
contractor.
Most often the client is going to end up with Static White lighting at a
warm white color temperature, like what you see here.
As you can see, it’s a nice warm light, the color’s look good, and there
is plenty of light to see by, but now I’d like you to imagine you’re
sitting down to a nice dinner or unwinding after a long day, you’re
going to want to dim the lights.
Switch to 3000K Dim
Presenter:
You’ll notice that instead of a candle-light like atmosphere you would
imagine, the light has stayed at the same color temperature, which
isn’t what people expect from traditional incandescent sources.
However, when using USAI’s warm glow dimming technology, you
have another option.
Switch back and forth between Warm Dim and 3000K Dim
Presenter:
I’ll switch back to the static white version now.
And now back to the warm glow. If you had an option between the
two which would you pick?
DEMO-LMCUBE-00 Light Matters Portable Demo Kit Deployment Guide
PN: 009-1832-00 | 190418
Presenter:
Light isn’t just something to allow things to be seen, Light is essential
to create mood in a space, but light also has a critical impact on your
health. Who uses night mode on their phone or tablets, or have seen
that feature?
What night mode is doing is limiting the amount of blue light and
intensity from your screen that you are exposed to prior to going to
bed. This allows your body to produce Melatonin which regulated the
sleep wake cycle. The same thing they’re doing on the Micro scale of
your phone is possible to do to an entire space with the right
technology.
Demonstrate Color Temperature Selections in next section. Transition from Warm
White up to Sunlight and back down to Sunset.
Presenter:
Imagine you’re waking up in the morning, the light has already starts
dim and warm before you wake up, gradually increasing in intensity
and color as the sun rises to mimic daylight. By noon it’s at its peak
color helping you work efficiently and then it slowly begins to warm
up in the afternoon as you wind down your day. You make dinner,
watch some TV, and by the time you’re ready for bed, the light is
already set to match and as a result, you get better sleep which
results in significant productivity and health benefits
Shift back to 3000K Optimal
Presenter:
We’ve talked about the ability of light to set the mood in a space the
and the health benefits, and even just provide the ability to see the
space but light is also critical to HOW you see. Materials reflect
certain wavelengths of light and absorb others; an apple is red
because it reflects Red light but absorbs the other colors. That means
that each material has its own “best light”.
We mentioned the standard lighting choice for residences was going
to be a warm white color, what we refer to as “3000K White”. But
what if when specifying the lighting someone in the process said,
“Hey, what finishes are they using? Oh, that steel kitchen and quartz
backdrop would look really crisp with a slightly cooler light.
Switch to Metal & Stone
Presenter:
Or maybe they say, “That warm oak and patterned couch would look
really nice with a little more warmth in the light.
Switch to Wood & Fabric
DEMO-LMCUBE-00 Light Matters Portable Demo Kit Deployment Guide
PN: 009-1832-00 | 190418
Presenter:
Suddenly those finishes that your client spent hours picking out, and
thousands of extra dollars to have are able to look their best.
I’ll go back to the typical setting now, and then switch back so you
can see the change again.
Switch back and forth between 3000K Optimal and Wood & Fabric
Presenter:
Now you can custom tailor the light not only for mood, the
occupant’s health, and the task at hand, but can dial it in to optimize
what will make the occupants and the design look like a million bucks
for a fraction of that.
The way USAI is dialing in these exact color mixes is by using white,
red, green, and blue LED die on a chip that they custom designed
from the ground up for optimal color mixing. The bonus of that is
your clients can mix things up a little bit depending upon their needs.
Perhaps they’re having a party and would love to make their great
room feel like a Miami night club.
Switch to Miami
Presenter:
Or they’re having a meditation session after yoga and want to unwind
in a calming blue.
Switch to Calm
Presenter:
The possibilities are endless and with the partnership between Savant
and USAI, your client is empowered to personalize their lighting
experience so that a touch of a button gives you the right light, at the
right time no matter what you need.
Please reach out to your local field team should you require
any further assistance in setting up your demo kit
or additional training on the importance of light.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11

Savant DEMO-LMCUBE-00 Deployment Guide

Category
Floodlights
Type
Deployment Guide

Savant DEMO-LMCUBE-00 is a lighting demonstration kit that showcases the benefits and capabilities of Savant's lighting solutions. This portable kit includes a pre-configured Savant S2 Host, DMX controller, Recess 3 WRGB fixture, Netgear wireless router, and cabling for connectivity. With its easy setup and intuitive software, you can quickly integrate the kit into your existing Savant system or use it as a standalone demonstration tool.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI