R-Series Single Module ABP Fiber LaserRFL-2000/4000-SM-ABP-R
Combining the welding advantages of single-mode fiber lasers and ABP beam-tunable fiber lasers, Raycus has launched a
new RFL-2000/4000-SM-ABP single-mode beam-tunable fiber laser for welding applications in new energy batteries and EV
automobile manufacturing. The high energy density of the single-mode beam in the center of this laser can ensure the
penetrating power. The ring beam can not only clean the welding area before welding, but also have the effect of slow
cooling after welding. This laser can improve welding quality and yield, especially in aluminum and copper materials that are
widely used in the battery industry.
1. Larger penetration depth and aspect ratio
2. The welding seam is beautiful and uniform
3. Stable welding process and less spatter
4. It can effectively reduce the pores and cracks in welding
5. Improve the speed and ensure the processing efficiency
6. Suitable for welding high reflective materials
Features and Advantages:
It can be well applied to new energy batteries, ev vehicles, 3c electronics
industries, etc.
The main applications of the products include: power battery pole piece
welding, pouch battery tab welding, battery terminal welding, ev car card
issuing motor copper flat wire laser welding, aluminum alloy mobile
phone case frame laser welding, cylindrical battery module welding, etc.
Applications :
R-Series High-End Q-Switch Pulsed Laser RFL-P30QH-R
The power instability of R-Series high-performance pulsed laser RFL-P30QH is less than ±1.5%, and the measured
beam quality parameter M²=1.33. The expansion of the frequency modulation range can effectively improve the
processing efficiency for specific industrial needs. The improvement of pulse establishment time and response
speed has obvious effects on precision machining and flying marking. This series of pulsed lasers can meet the
needs of applications such as marking tiny two-dimensional codes, precision marks, engraving metals, marking
white plastics, etc., and its pulse consistency is excellent.
1. The frequency range is wider and more stable
2. Excellent power stability
3. Short pulse build-up and turn-off time
4. Excellent beam quality, high spot roundness
Features and Advantages: · Precision marking
· Precision welding
· Micromachining
· Deep engraving
· Sheet cutting and drilling
Applications:
R-Series Raycus Fiber Deep UV LaserRFL-P015DUV-R
Compared with excimer deep ultraviolet laser, Raycus fiber deep ultraviolet laser RFL-P015DUV has obvious
advantages. It has stronger grating writing ability, better beam quality, safer and more stable, less maintenance,
higher electro-optical conversion efficiency and smaller volume. . This product has a yield rate of 100% in the
20/400 large mode field fiber grating writing test. Compared with many other brands of solid-state and excimer
deep ultraviolet lasers, it has obvious advantages in terms of performance and price.
1. Output wavelength 213nm
2. The average output power is up to 150mW, the pulse width is less than 3ns, and the repetition frequency can reach 250kHz;
3. The full width at half maximum (FWHM) of the output spectrum is less than 0.1nm, which can support higher-precision grating
writing
4. The output beam mode is TEM00, the roundness of the spot is greater than 95%, and the energy density of the beam is higher,
which can ensure the writing efficiency and accuracy well;
5. After 100 hours of long-term aging test, the power instability is less than 1%, which can ensure the consistency of writing
6. Compared with excimer and solid-state deep ultraviolet lasers of the same level on the market, the volume is reduced by 50%
Features and Advantages:
Duv laser detection, photoli-
thography, fbg writing, duv
sterilization, spectral analysis
(short-wave ultraviolet raman
spectrometer, ozone monitor-
ing, environmental monitoring,
criminal investigation, etc.)
Applications:
Mode
Center Wavelength(nm)
Average Power(W)
Repetition Frequency Range (kHz)
Max.Single Pulse Energy (mJ)
Pulse Width (ns )
Beam Quality（M²）
Output Beam Diameter(mm)
Pulse Settling Time (us)
RFL-P30QH-R
1064
30
2-500
1
80-120@20kHz
<1.6
6—8
2
R-Series High-End
Fiber Laser
Product Manual
Reshape Fiber Lasers
R-Series 6000W CW Fiber LaserRFL-C6000-R
Raycus R-series high-performance 6kW fiber laser adopts industrial style and miniaturized appear-
ance design; rich bus interface can meet the processing requirements of various industries; it can
realize intelligent interaction, so as to manage the health of the laser. The laser has undergone a
variety of technical upgrades, making the product have high safety, high reliability, high stability, high
beam quality, high electro-optical conversion efficiency, fast response rate, high intelligence, high
user experience and a variety of customized Optional items: It can be widely used in welding applica-
tions in aerospace, shipbuilding, automobile, new energy, 3C and other industries and fields. It has
the advantages of high processing precision, fast speed, beautiful weld seam and high yield.
1. Steady industrial style design
2. Abundant bus interfaces to meet the needs of various industries
3. Miniaturized design, reducing transportation and storage costs
4. Human-computer intelligent interaction to realize health management
Features and Advantages:
Aerospace Manufacturing
Shipbuilding
Automobile Manufacturing
3c Manufacturing
Applications:
R-Series ABP Laser with Shutter RFL-4000/2000-ABP-BST-R
Raycus R-series ABP lasers with shutter adopt new technology design platform. Upgrade
through the following technologies:
· High brightness, high redundancy, long life pump source;
· Low photon darkening, high reliability coated active optical fiber;
· Independent control unit of center core and ring core power ;
· Bus control such as Profinet and Ethernet;
· Shutter with high coupling efficiency and high frequency switching. This product can be
widely used in welding fields such as automobiles, new energy, 3C electronics, etc. High
welding efficiency, smooth and beautiful weld seam, no spatter during welding. It can be
continuously applied to automatic production lines for a long time and has high produc-
tion yield.
1. Dual analog control, center core and ring core power can be
independently adjusted in any proportion;
2. Independent output of all-fiber structure, optional 2-way or 4-way
shutter;
3. Profinet and Ethernet and other buses are optional;
4. The power of the center core/ring core, the core diameter of the fiber
and the mode of the beam can be customized;
5. There is no spatter in the welding process and the processing quality
and efficiency are high.
Features and Advantages:
Aerospace manufacturing: aircraft skin panel welding, aircraft longitudinal bone
welding, pure titanium welding of satellite components.
New energy battery processing: welding of the top cover of the square battery and the
top cover of the cylindrical battery, welding of electrode adapter (high reflective materi-
al). Welding of butt joints of busbar and battery side plates, lap welding of battery joints.
Applications:
R-Series 500W MOPA Pulse Fiber LaserRFL-P500MX-R
The R-series 500W MOPA pulsed fiber laser launched by Raycus adopts a water-cooled design and it has many features such as excellent stability, high single pulse
energy (up to 2mJ), high beam quality (≤1.8) and multiple pulse width options (20 -500ns), repetition frequency 1-4000kHz, first pulse available, with continuous
mode and with network port function. This laser is ideal for industrial applications such as precision machining of thin foils and coatings, surface treatment,
micromachining, photovoltaics, scribing and new energy battery manufacturing.
1. Wide Modulation Frequency Range;
2. Variety of Pulse width;
3. Customize Pulse Width;
4. High Beam Quality;
5. Uniform Control Interface;
6. Available first pulse.
Features and Advantages:
New energy battery pole piece cutting,
metal deep carving, flat copper wire
cleaning, battery pole cleaning,
pole piece cleaning,
enameled wire cleaning, etc.
Applications:
R-Series 1000W Pulsed Fiber Laser for Cleaning RFL-P1000H-R
Compared with the multi-module 1000W Q-switched laser, the volume of RFL-P1000H-R is reduced by 60%, and the weight is reduced by more than 40%. Its main
advantages are adjustable pulse width, wide frequency range, high single pulse energy (up to 100mJ), high peak power (up to 1MW), and strong laser anti-high
reflection ability.
Major technological upgrades:
· Breaking through the limitation of nonlinear effects and realizing a single module 1000W pulsed laser output;
· The maximum single pulse energy is increased to 100mJ, which is the highest index realized in China;
· High-reflective materials can be cleaned vertically ;
· The minimum pulse width can re ach 20ns, which is used in fields that require thermal effects;
· BPP is less than 25mm*mrad@400 microns. It can be used for mold cleaning, paint removal and rust removal for large equipment such as ships and aircrafts;
precise paint removal for precision parts; surface roughening, etc. especially has obvious advantages in the fields of blue film and blue paint cleaning of new
energy power batteries.
1. Adjustable frequency, adjustable pulse width;
2. High single pulse energy and high peak power;
3. Single module with small size;
4. Applicable to the processing of high reflective materials.
Features and Advantages:
Paint/rust removal of aircraft tail boom, fairing and propeller, oxidized layer cleaning
of aluminium alloy non-ferrous metal, oxidized skin cleaning of aircraft engine parts
and cleaning of aircraft skin, cleaning of molds, precise paint removal of precision
parts, surface roughening and texturing, new energy power battery blue film or blue
paint cleaning, etc.
Applications:
R-Series 1000W CW Fiber Laser for 3D PrintingRFL-C1000S-AM-R
Compared with traditional lasers, R-series C1000S AM 3D printing fiber laser has higher photoelectric conversion efficiency, low power consumption and excellent
beam quality. Due to its flexible laser output mode, it can be easily integrated with equipment.
1. Excellent beam quality;
2. High reliability;
3. High power stability;
4. Continuously adjustable power,
fast switching response;
5. Editable waveform;
6. Double interlock;
7. Maintenance-free operation;
8. High electro-optical conversion efficiency.
Features and Advantages:
Widely used in the field of aerospace for the 3d-printing of
hollow lattice structures, rocket engine regenerative
nozzles and combustion chamber nozzles integrated
structures and aviation simulation functional parts. And 3d
printing of parts in the field of automobile manufacturing,
3c electronics manufacturing, medical dentistry, etc.
Applications:
/
