1of3
Crossbar Assembly
x1
A
Package Contents
PARTS BAG
Fixture Body
x1
D
Shade Holder
x1
G
Diffuser
x1
F
Preparation: Identify and inspect all parts
before beginning the installation.
Missing or damaged parts? Contact your
original place of purchase.
LightSourceToolsRequired
3BULBSREQUIRED
BULBSNOTINCLUDED
Warnings and Cautions
Turn off the electricity at the circuit breaker
before installation. Consult a licensed
electrician if in doubt about installation.
Turn off power to the fixture and allow the
bulbs to cool before replacing.
Outlet Box Screw
x2
B
Wire Connector
x3
C
Crossbar
Assembly Shade, Diffuser,
Shade Holder
Table of
Contents
STEP 2 STEP 3
Shade
x1
E
Bulb
STEP 6
Fixture Body
STEP 5
Wiring
STEP 4
BULB BASE TYPE
Medium (E26)
BULB SHAPE
TYPE A
100W
MAX
Unfold Arms
STEP 1
Installation Instructions: UQL3770
www.urbanambiance.com
2of3
STEP 1
STEP 2 1 2 3
Step 1
Install crossbar assembly
Step2-3
Test fitting ceiling canopy to
mounting screws
STEP 3 1 2
Remove lock balls Install shade and diffuser
www.urbanambiance.com
3of3
STEP 4
*Green Ground Screw on
crossbar optional
White wire (neutral)
from outlet box White wire
from fixture
Black wire
from fixture
Ground wire
from Fixture
Black or Red wire (hot)
from outlet box
Bare or Green ground wire
from outlet box
STEP 5
STEP 6
www.urbanambiance.com
/
