urban ambiance UQL4170 Installation guide

Type
Installation guide
1of3
LightSourceToolsRequired
Warnings and Cautions
Turn off the electricity at the circuit breaker
before installation. Consult a licensed
electrician if in doubt about installation.
Turn off power to the fixture and allow the
bulbs to cool before replacing.
Crossbar Assembly
x1
A
Package Contents
PARTS BAG
Ceiling Canopy
x1
Crossbar
Assembly Ceiling Canopy
Table of
Contents
STEP 1 STEP 3
Preparation: Identify and inspect all parts
before beginning the installation.
Missing or damaged parts? Contact your
original place of purchase.
Wiring
STEP 2
D
Outlet Box Screw
x2
B
Wire Connector
x3
C
Cage
x1
F
Diffuser
x1
G
STEP 4
Diffuser
STEP 5
Cage
25W
LED
Screw
x3
E
Installation Instructions: UQL4170
www.urbanambiance.com
2of3
STEP 1 1 2 3
Step 1
Install crossbar assembly
Step2-3
Test fitting ceiling canopy to nipple
STEP 2
*Green Ground Screw on
crossbar optional
White wire (neutral)
from outlet box White wire
from fixture
Black wire
from fixture
Ground wire
from Fixture
Black or Red wire (hot)
from outlet box
Bare or Green ground wire
from outlet box
STEP 3
www.urbanambiance.com
3of3
STEP 4
STEP 5
www.urbanambiance.com
  • Page 1 1
  • Page 2 2
  • Page 3 3

urban ambiance UQL4170 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI