urban ambiance UQL3940 Installation guide

Brand
urban ambiance
Model
UQL3940
Category
Car kits
Type
Installation guide
1 of 3
Light SourceTools Required
BULB BASE TYPE
Medium (E26)
BULB SHAPE
TYPE A
60W
MAX
3 BULBS REQUIRED
BULBS NOT INCLUDED
Warnings and Cautions
Turn off the electricity at the circuit breaker
before installation. Consult a licensed
electrician if in doubt about installation.
Turn off power to the fixture and allow the
bulbs to cool before replacing.
Crossbar Assembly
x 1
A
Package Contents
PARTS BAG Fixture Body
x 1
Crossbar
Assembly
Table of
Contents
STEP 1
D
Preparation: Identify and inspect all parts
before beginning the installation.
Missing or damaged parts? Contact your
original place of purchase.
Wiring
STEP 2
Ring
x 1
FGlass Shade
x 1
G
Shade & Ring
STEP 5
Outlet Box Screw
x 2
B
Wire Connector
x 3
C
Fixture Body
STEP 3
Bulbs
STEP 4
Lock Screw
x 3
E
Installation Instructions: UQL3940
www.urbanambiance.com
2 of 3
STEP 1 1 2 3
Step 1
Install crossbar assembly
Step 2 - 3
Test fitting ceiling canopy to nipple
STEP 2
*Green Ground Screw
on crossbar optional
White wire (neutral)
from outlet box
Ground wire
from Fixture
Black or Red wire (hot)
from outlet box
Bare or Green ground wire
from outlet box
Supply wire from fixture
Ribbed side or identified
with the Label “N”
supply wire from fixture
Smooth side or identified
with the label “L”
STEP 3
www.urbanambiance.com
3of 3
STEP 4
STEP 5
23
Install Shade onto the Ring Install Shade with Ring
www.urbanambiance.com
  • Page 1 1
  • Page 2 2
  • Page 3 3

urban ambiance UQL3940 Installation guide

Brand
urban ambiance
Model
UQL3940
Category
Car kits
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers