2. aspenhome
  3. I644-451

aspenhome I644-451 Assembly Instructions

  • Hello! I'm a chat assistant trained to provide information about the aspenhome I644-451 Nightstand. I've reviewed the assembly instructions and am ready to assist with any questions you might have about its components, assembly process, or features like the felt-lined drawer and USB charging ports.
  • What tools are required for assembly?
    What hardware is included?
    What type of USB ports are included?
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference. FOR INDOOR USE ONLY
FUNCTIONALITY INSTRUCTION
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
Page 1/2
ITEM NO: I644-451 1 Drawer Nightstand
Adjust the leveler
when necessary
Leveler on Legs
Felt-lined Drawer
Tempered Glass
Powered USB Ports (1 Type
A+1 Type C) for Charging
HARDWARE LIST:
No. Description Sketch Quantity
A12 PCS
B
C
D Allen Wrench 4mm 1 PC
COMPONENTS LIST:
No. Description Sketch Quantity
1 Case 1 PC
2 Metal Leg 4 PCS12 PCS
12 PCS 1 PC3 Tempered Glass
04-24-2023
Bolt Ø5/16" x 1"
Lock Washer Ø5/16"
Flat Washer Ø5/16" x 3/4"
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
Page 2/2
ITEM NO: I644-451 1 Drawer Nightstand
STEP 1: Put the case upside down on a soft surface.
STEP 2: Attach the metal legs by using 12 bolts (A), lock washers (B) and flat washers (C).
Use the allen wrench (D) to tighten all bolts. Return the case to the upright position.
Tempered Glass
A
B
C
D
Metal Leg
STEP 3: Take out the tempered glass and place it on the case top.
04-24-2023
/