2. RAB
  3. R3-9B
R3-9B

RAB R3-9B User manual

  • Hello! I'm a chat assistant that has read the provided instruction manual for RAB's CCT-Adjustable Deep Recessed Downlights, specifically models R3-9B, R3-15B, R3-9, R3-15, R3S-9B, and R3S-15B. I'm ready to answer your questions about the device, its features, installation process, or anything else found within the document.
  • What is included in the box?
    What is the diameter of the cutout template for 3" models?
    What should be done before the installation?
    Are there any optional accessories available?
INSTRUCTIONS
and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: mar[email protected]
CCT-Adjustable Deep Recessed Downlight
R3-9B & R3-15B R3-9 & R3-15 R3S-9B & R3S-15B
A
B
C
D
E
2
1
2
1
1
2
4
9
10
2
3
5
3
7
10
3”
INSTRUCTIONS
and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: mar[email protected]
CCT-Adjustable Deep Recessed Downlight
Cranbury,New Jersey 08512 USA
© 2023 RAB LIGHTING Inc.
3“REGRESS-IN-0523
5. Place all wiring and connections back into the driver box and
close the cover and select the color temperature (CCT). (Fig. 4)
CCT adjustment switch
6. Place the driver box into the ceiling and connect the fixture
to the driver box. (Fig. 5)
2. Use the included template to cut a hole in the ceiling. (Fig. 1)
3. Open the drive box and remove the needed knockout(s). (Fig. 2)
7. Lift both retention tabs upward and push until the trim sits
flush against the ceiling surface. (Fig. 6)
See below size of the cutout
template:
3" models: 3" diameter
OPTIONAL ACCESSORIES
DLPLATE/WFR3468/NB DLPLATE/WFR3456
Mounting plate with nailer bar Mounting plate
/