2. RAB
  3. GF4
GF4

RAB GF4 User guide

  • Hello! I've reviewed the instructions for the RAB GF4 CCT-Adjustable Floating Gimbal Downlight. This document outlines important safety measures, installation steps, and the components included in the product, such as the fixture, driver box, and template. I can answer any specific questions you have about the information provided.
  • What should I do before installing the fixture?
    What is included in the box?
    Who should perform the installation
INSTRUCTIONS
and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: mar[email protected]
CCT-Adjustable Floating Gimbal Downlight
GF4
A
B
C
D
E
2
1
2
1
1
2
4
9
10
1
3
5
4
9
10
3”
INSTRUCTIONS
and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: mar[email protected]
CCT-Adjustable Floating Gimbal Downlight
Cranbury,New Jersey 08512 USA
© 2023 RAB LIGHTING Inc.
GF4-IN-0523
CCT adjustment switch
5. Place all wiring and connections back into the driver box and
close the cover and select the desired color temperature (CCT).
(Fig. 4)
6. Place the driver box into the ceiling and connect the fixture to
the driver box. (Fig. 5)
2. Use the included template to cut a hole in the ceiling. (Fig. 1)
3. Open the drive box and remove the needed knockout(s). (Fig. 2)
7. Lift both retention tabs upward and push until the trim sits
flush against the ceiling surface. (Fig. 6)
See below size of the cutout
template:
4" models: 4-5/16" diameter
OPTIONAL ACCESSORIES
DLPLATE/WFR3468/NB DLPLATE/WFR3456
Mounting plate with nailer bar Mounting plate
/