2. Computers & electronics
  3. Telecom & navigation
  4. Mobile headsets
  5. Laser
  6. AO-EVDBL-019
AO-EVDBL-019

Laser AO-EVDBL-019 User manual

  • Hello! I am an AI chatbot trained to assist you with the Laser AO-EVDBL-019 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • How do I turn on the headphones?
    How do I pair the earbuds?
    How long is the speaker battery life?
User Manual
3 in 1 Audio Bundle
AO-EVDBL-019
Contents ..................................................................................... 1
What’s in the box ........................................................................ 2
Headphones ............................................................................... 3
Earbuds ...................................................................................... 6
Speaker ...................................................................................... 10
Troubleshooting .......................................................................... 14
CONTENTS
1
• Headphones
• Earbuds
• Speaker
• USB-C charging cable
• User manual
WHAT’S IN THE BOX
2
Play/Pause button
Indicator light
USB-C Chargeing port
3.5mm Aux port
Microphone
Controls and Ports
Charging
ⓘ Fully charge the headphones before first use.
ⓘ Switch off headphones before recharging.
ⓘ Disconnect the cable when fully charged.
Use the supplied cable. Connect the USB-C jack to the
headphones.
Connect the other end to a USB power source.
The indicator light will turn red when charging; it will turn off when
charging is done.
A USB power adaptor (5V 1A, not included) is recommended for
charging, or a PC/laptop USB port can be used.
Bluetooth
Pairing
1. Turn on the headphones by pressing and holding Play/Pause
button for 3 seconds.
2. Enable Bluetooth on your connecting device. It will search for
nearby Bluetooth devices.
HEADPHONES
3
HEADPHONES
3. Select “AO-EVDBL-H”.
If “AO-EVDBL-H” does not appear on your connecting device’s
screen, try again from the beginning of step 1.
4. Audio played on your connected device, can now be heard
through the headphones.
Basic Operations
Power On/Off
Press and hold the Play/Pause button for 3 seconds to turn on
or off.
Play/Pause music
Press the Play/Pause button to play or pause the music.
Volume Up/Down
Press the + or - button to increase or decrease the volume.
Select the next/previous Song
When listening to music, double press the +/button to skip to
the next song.
When listening to music, double press the -/button to skip
to the beginning of the song; double press again to skip to the
previous song.
Answer/Hang Up phone call
When there is an incoming call. Press the Play/Pause button to
answer the call.
Press again to end the call.
Reject
When there is an incoming call, long press the Play/Pause
button to reject the call.
4
HEADPHONES
Activate the voice assistant
Double press the Play/Pause button to activate voice assistant.
Double press the Play/Pause button again to quit.
Disconnecting/Unpairing:
1. To disconnect, turn off your connected device’s Bluetooth or the
headphones.
2. To unpair (remove the connection entirely), go to your connected
device’s Bluetooth settings, find the headphones on the list of
paired devices, and select “Forget” or “Unpair”.
ⓘ The headphones only connect to one device at a time.
AUX Input
1. Plug one end of the auxiliary cable (3.5mm audio cable; not
supplied) into the headphone jack of the external device.
2. Plug the other end to the AUX port of the headphones.
3. Start playing music from the external device.
Specifications
Bluetooth version: v5.3
Battery capacity: 200mAh
Effective distance: 10M
Play time: Up to 20 hours
Charging time: Approximately 2 Hours
5
EARBUDS
Controls and Ports
Charging
ⓘ Fully charge the case and the earbuds before first use.
ⓘ Recharge the earbuds while the case is closed.
ⓘ Disconnect the cable when fully charged.
Use the supplied cable. Connect the USB-C jack to the case.
Connect the other end to a USB power source.
A USB power adaptor (5V 1A, not included) is recommended for
charging, or a PC/laptop USB port can be used.
When charging, the LEDs on the case and earbuds will flash; they
will turn off when charging is done.
Earbuds
indicator light
Tap area
USB-C
Charging Port
Case indicator
light
6
Basic Operations
Power On/Off
Method 1:
Open the charging case and remove the earbuds to turn them on
automatically.
Place the earbuds into the charging case and close it to
automatically turn them off.
Method 2:
Press and hold the button for 3 seconds to turn on.
Press and hold the button for 5 seconds to turn off.
Play/Pause music
Tap the left/right earbud twice to play or pause the music.
Volume Up/Down
Double tap the left earbud to decrease the volume.
Double tap the right earbud to increase the volume.
Select the next/previous Song
Tap the left earbud 3 times to go back to the beginning of the song
and then quickly press 3 times again to skip to the previous song.
Tap the right earbud 3 times to skip to the next song.
Answer/Hang Up phone call
When there is an incoming call. Tap the left or right earbud twice to
answer the call.
Tap twice again to end the call.
EARBUDS
7
Reject
When there is an incoming call, press and hold the left/right earbud
to reject the call.
Activate the voice assistant
Press and hold the left/right earbud for 2 seconds to activate voice
assistant.
Press and hold for 2 seconds to quit the voice assistant.
Bluetooth
Pairing
1. Turn on the earbuds.
2. Remove the earbuds from the box and wait for a few seconds until
the two earbuds pair up (right LED flashes).
3. Once paired, enable Bluetooth on your connecting device. It will
search for nearby Bluetooth devices.
4. Select “AO-EVDBL-T”.
If “AO-EVDBL-T” does not appear on your connecting device’s
screen, try again from the beginning of step 1.
5. Now, audio you play on your connected device should come
through the earbuds.
Disconnecting/Unpairing:
1. To disconnect, turn off your connected device’s Bluetooth or the
earbuds.
EARBUDS
8
EARBUDS
2. To unpair (remove the connection entirely), go to your connected
device’s Bluetooth settings, find the earbuds on the list of
paired devices, and select “Forget” or “Unpair”.
ⓘ The earbuds only connects to one device at a time.
Specifications
Bluetooth version: v5.3
Playtime: 2-3 hours per charge
Working Range: 10m
Case’s battery capacity: 200mAh
Earbud’s battery capacity: 30mAh
Charge Time: about 2 hours
9
SPEAKER
Controls and Ports
Blue indicator light:
Flashing quickly: waiting for pairing
Flashing slowing: Music playing
Always on: Music on pause
Charging
ⓘ Fully charge the speaker before first use.
ⓘ Recharge the speaker when it is switched off.
ⓘ Disconnect the cable when fully charged.
1. Lift the rubber flap next to the Power button.
2. Use the supplied cable. Connect the USB-C jack to the speaker.
Connect the other end to a USB power source.
A USB power adaptor (5V 1A, not included) is recommended for
charging, or a PC/laptop USB port can be used.
USB-C
Chargeing Port
Power button Indicate Light
10
SPEAKER
Basic Operations
Power On/Off
Press and hold the On/Off button for 3 seconds to turn on or off.
Play/Pause music
Press the Power button to play or pause the music.
Volume Up/Down
Use the connected device to control the volume.
Answer/Hang up
When there is an incoming call. Press the Power button to
answer the call.
Press again to end the call.
Reject
When there is an incoming call, long press the Power button to
reject the call.
Bluetooth
Pairing
1. Turn on the speaker.
2. Enable Bluetooth on your connecting device. It will search for
nearby Bluetooth devices.
3. Select “AO-EVDBL-S”.
If “AO-EVDBL-S” does not appear on your connecting device’s
screen, try again from the beginning of step 1.
11
4. Now, audio you play on your connected device should come
through the speaker.
Disconnecting/Unpairing:
1. To disconnect, turn off your connected device’s Bluetooth or the
speaker.
2. To unpair (remove the connection entirely), go to your connected
device’s Bluetooth settings, find the speaker on the list of paired
devices, and select “Forget” or “Unpair”.
ⓘ The speaker only connects to one device at a time.
Bluetooth True Wireless Stereo (TWS) Connection
Pair two AO-EVDBL-019 speakers to create a stereo experience
(dependent on source), with one as the left channel and the other as
the right channel.
TWS Pairing
ⓘ TWS pairing will not work if speakers are already connected to a
device via Bluetooth.
1.Turn off Bluetooth on the connecting device.
2.Turn the two speakers on.
3.Press the Power button on the speakers three times at the same
time to automatically find and pair with each other. Once paired,
a confirmation tone will play.
Pair with your connecting device
4.Turn on Bluetooth on your connecting device and select “ AO-
EVDBL-S.”
SPEAKER
12
At this time, only one instance of “AO-EVDBL-S” will appear on
your connecting device’s screen. If the name does not appear, try
again from the beginning of step 1.
5.Now, audio you play on your connected device should come
through the two speakers.
Unpairing TWS Connection
Press the power button on the speaker three times to disconnect from
TWS pairing mode and use as two separate speakers.
Specifications
Bluetooth version: v5.3
Input power: 5V, 1A
Battery capacity: 400mAh
Effective distance: 10M
Speaker output: 3W
Play time: About 3 hours
Charging time: About 2 hours
SPEAKER
13
TROUBLESHOOTING
Devices do not turn on
• The battery is completely discharged. Recharge the battery.
No sound from the speaker
• The volume level is low or muted. Unmute or increase the the
volume.
• There is no connected Bluetooth device. Pair and connect a
Bluetooth device and try again.
Cannot pair a Bluetooth device with the speaker
• The Bluetooth device is out of range. Bring the Bluetooth device
closer to the speaker.
• Make sure the speaker is in Bluetooth mode. Turn off the speaker
and turn it on again to switch to Bluetooth mode.
• If the device’s Bluetooth name is not found on the Bluetooth list,
refresh the list, or search again and wait up to 1 minute for the
device to appear.
• If the speaker is already paired with another device, disconnect or
unpair before connecting to the second device.
14
Visit our website
Check us out at
www.youtube.com/lasercoau
www.laserco.com.au
/