2. Troy-Bilt
  3. 24BF572B711
24BF572B711

Troy-Bilt 24BF572B711 Fast Start Guide

  • Hello! I am an AI chatbot trained to assist you with the Troy-Bilt 24BF572B711 Fast Start Guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
778-11825© 2009 24BF572B
Release the A.
beam lock.
Pivot the B.
beam
downward
into the
horizontal
position
and lock.
Remove the spring A.
clip and clevis pin.
Pivot jack stand B.
into operating
position.
Secure the jack C.
stand with the
spring clip and
clevis pin.
Remove the hardware from the tank
bracket. Align holes of tongue with
holes in tank bracket and secure with
the hardware just removed.
1
2
Lift and slide the cylinder
to the top of the beam
and onto the bracket.
Remove the dislodger.A.
Remove the log cradle located on the side B.
of the beam above the control valve.
Re-attach the dislodger.A.
Re-attach the log cradle.B.
B
B
B
A
A
A
Jack Stand
Cylinder
Tongue
Dislodger
Control
Valve
Wedge
Beam
Log
Cradle
1
4
2
5
3
6
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY
AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING.
Need Help? Call 1-888-TO-HELP-U
Form No. 778-11825© 2009 24BF572B
Rotate the Engine Stop Switch to the ON
position.
Fill tank with gas to bottom of fuel level limit
in the neck of the fuel tank. Do not overfill.
Turn fuel valve to ON position.
Pull the Choke Rod outward.
OFF
ON
Grasp the Starter Rope Handle an pull with a quick,
full arm stroke.
If engine does not start after ten seconds of
repeated pulls, wait a few minutes and repeat.
Push the Choke Control inward after engine starts.
IMPORTANT: Check engine oil, lubricate beam, adjust wedge
assembly, and check hydraulic fluid level before operating.
Refer to Operator’s Manual for instructions.
Starter Rope
Handle
Gas Cap
Choke Rod
Engine Stop
Switch
Fuel Valve
1
3
2
4
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY
AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING.
Need Help? Call 1-888-TO-HELP-U
/