Homestyles 5217-95 Operating instructions

Brand: Homestyles

Model: 5217-95

Type: Operating instructions

Homestyles 5217-95 is a versatile stainless steel kitchen island with ample storage and work surface. Its sturdy construction and adjustable shelves make it suitable for a variety of kitchen tasks and storage needs.

The island features a spacious top that provides ample space for food preparation, serving, or as a casual dining area. The included shelf offers additional storage for cookware, utensils, or other kitchen essentials, and can be placed at a desired height for easy access.

The kitchen island's base includes two drawers for concealed storage of utensils, linens, or other items. The drawers are constructed with a knock-down design, allowing for easy assembly and disassembly for cleaning or space optimization.

Part List

Hardware List

Side Frame

.1 pc

Top

1 pc.

Hex Wrench

1 pc.

Caster

Two casters with lock

Two casters without lock

4 pcs.

Machine Screw

for Pull Handle

4 pcs.

Pull Handle

2 pc.

Head Cap Bolt

15 pcs. (+1Extra)

Wood Screw

Short 6 x ½

(for Drawer Bottom Part)

”

12 pcs.(+1 Extra)

Wood Plug

13 pcs.

(+1 Extra)

Wood Screw

Long 6 x 1

(for Drawer Side Part)

”

16 pcs.(+1 Extra)

Front Rail

2 pcs.

Back Rail

1 pc.

Divider

1 pc.

Shelf

1 pc.

Drawer

(Knock-Down Construction, please refer to

the page (4/4) of these instructions for

steps to complete assembling drawers)

2 drawers

Side Frame

1 pc.

Head Cap Bolt (short)

(for Side Bar)

2 pcs. (+1 Extra)

Base

1 pc.

Side Bar

1 pc.

88 5217 95C

Stainless Steel Top Kitchen Island

Supporting Pin

(+1 Extra)4 pcs.

Cam Lock Screw

4 pcs.(+1 Extra)

Cam Lock

4 pcs.(+1 Extra)

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damages occuring to the parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure a

completed product as it was designed.

Tools Required For Assembly : Phillips screwdriver

Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319

[email protected]

Small

Hex Wrench

1 pc.

Revised date : 24Mar2011

IMPORTANT

Do not tighten up all the screws until each part is properly assembled. You should keep Hex Wrench in the safe place as

you may need to tighten up the Head Cap Bolts in the future.

STEP 1

STEP 2

STEP 3

Attach the Divider (F) and another

Front Rail to the assembled unit.

Attach the Front Rail (D)

and Back Rail (E) to the

Side Frame (B).

Assembly Instructions 2/4

Turn the Side Frame (B) upside down

on the soft material.

Attach the locking caster to the leg with sign,

and the non-locking caster to the other leg.

Do the same for the Side Frame (C).

Head Cap Bolt

Locking Caster

Non-Locking Caster

Head Cap Bolt

Assembly Instructions 3/4

STEP 4

STEP 5

STEP 7

STEP 6

Cover all holes with Wood Plugs

Attach the Base (G)

and Side Frame (C)

to the assembled unit.

Attach the Side Bar (J)

to the Side Frame (C).

Head Cap Bolt

Head Cap Bolt (short)

Cam Lock

Cam Lock Screw

Supporting Pins

Place the Top (A) on the assembled unit.

Place the Cam Locks into the holes of the

Side Frame (B) and (C).

Tighten up all the Cam Locks to secure

the Top with the body. Insert the Supporting Pins

into both side frames at the desired level.

Place Shelf (H) and slide the Drawers (I)

into place.

Make sure the Arrow sign

is on top.

Put the Cam Lock Screws into the holes at the

back of the Top (A).

See the “Arrow”

on top

Assembly Instructions 4/4

Slider Wheel

Figure 1

Line up Side Parts (I3) and (I4) to the

Front Part (I1) and Back Part (I2). Make sure

the sign on each part is going down.

Using a screwdriver, insert 1” screws

into each of the 4 pre-drilled holes on the

sides

Philips

(I3) and (I4), then tighten half way.

Drawer

Part List

I1.

Front Part

2 pcs.

I5.

Bottom Part

2 pcs.

I2.

Back Part

2 pcs.

Figure 2

Figure 3

Turn the assembled drawer over and slide the

Plywood Bottom Part (I5) into the grooves

of Side Parts Be sure to push

the plywood bottom part all the way forward,

so it meets the Front Part (I1).

(I3) and (I4).

Insert the remaining ” screws (6 pcs.)

into the pre-drilled holes at the Bottom Part

(I5), then tighten up all screws

I3.

Side Part

2 pcs.

I4.

Side Part

2 pcs.

Assemble the Pull Handle

with Machine Screw.

to the Front Part (I1)

* If you are missing any of these

parts, please contact our DMI

Customer Service Department

at 1-877-831-0319 or fax us at

1-800-755-2878.

Homestyles 5217-95 Operating instructions

Homestyles 5217-95 Operating instructions

Homestyles 5217-95 Operating instructions

Related papers

Other documents