PART LIST
K.
Round Arms
1 pc.
HARDWARE LIST
Head Cap Bolt
16 pcs.(+1 Extra)
Hex Wrench
1 pc.
Machine Screw
for Pull Handle
6 pcs.
Wood Screw
(for caster)
16 pcs. (+1 Extra)
B.
Side Frame L.
1 pc.
C.
Side Frame R.
1 pc.
Pull Handle
3 pcs.
A.
Top
1 pc.
F.
Base Panel
1 pc.
E.
Front Rail
1 pc.
I.
Back Panel
2 pcs.
D.
Upper
Back Stretcher
1 pc.
G.
Lower
Back Stretcher
1 pc.
H.
Middle
Back Stretcher
1 pc.
M.
Adjustable Shelf
1 pc.
J.
Handle Arms
2 pcs.
Wood Plug
6 pcs.(+1 Extra)
88504095 C
Kitchen Cart with
one Drawer, two Doors
and Adjustable Shelf
Adjustable Pin
4 pcs.(+1 Extra)
Wood Screw 6 x 1”
Long (for Drawer)
8 pcs.(+1 Extra)
Caster
2 with brake and
2 without brake
4 pcs.
O.
Door
2 pcs.
L.
Drawer
(Knock-Down Construction, please
refer how to assemble the drawer
on the last page of this assembly
instructions).
1 pc.
Thai Patent Numbers 14892
Dear Our Valuable Customers,
Please follow our assembly instructions in every step,
we guarantee that you will get the perfect merchandise.
Thank you so much for purchasing our quality products.
Casual Attire For Today's Home
Tools Required For Assembly : Philips screwdriver
Assembly Instructions 2/4
IMPORTANT
Do not tighten up all the screws until each part is properly assembled.
You should keep Hex Wrench in the safe place as you may need to tighten up
the Head Cap Bolts in the future.
STEP 1
STEP 2
Attach the Side Frame L (B) to the Base
Panel (F) with Head Cap Bolts.
Attach the Front Rail (E),Lower Back Stretcher (G)
to the Assembled Unit. Tighten the Head Cap Bolts.
Attach the Middle Back Stretcher (H) to the Lower
Back Stretcher (G), then slide the Back Panels (I) in place.
Attach the Upper Back Stretcher (D) to the Assembled Unit.
Tighten the Head Cap Bolts.
STEP 3
E
I
I
H
G
D
F
F
B
Attach 4 Casters to the under side of
the Base Panel (F) with Wood Screws (I),
put the 2 Casters with brakes in front as
you first need to lock the cart from moving.
C
K
J
J
Attach the Side Frame R (C) to the Assembled Unit, then tighten Head Cap Bolts.
Attach the Handle Arms (J) using Head Cap Bolts from the inside of the both Side Frames and
put the Round Arms (K) in place.
Tighten Head
Cap Bolt by
Hex Wrench.
STEP 4
STEP 5
Attach the Doors (O) to the Assembled Unit.
Assemble the Door Pull Handles using the Machine Screws.
Insert the Adjustable Pins into the Side Panel, in the desired level. Place Adjustable Shelf (M)
and Slide the Drawer (L) in place.
Assembly Instructions 3/4
Attach the Top (A) to the Assembled Unit,
tighten all the Head Cap Bolts through
the Side Frame (B) and (C).
O
B
C
A
L
M
Top
Assembly
STEP 6
Cover all holes with
Wood Plugs
See the attached sheet for
Drawer Assembly Instructions.
Door Assembly
using Hinge
Pull Handle
Assembly
(Fig)1
MAKE SURE ROLLER
IS ON THE BACK
L3
L4
L1
(Fig) 1
Line up Side Parts (L3) and (L4) to the
Front Part (L1). Be sure to follow the Arrow sign
sticker on the parts. Using a Philips screw driver,
insert 1” screws (II) into each of the 4 pre-drilled
holes in sides (L3) and (L4), then tighten half way.
Assembly Instructions 4/4
Drawer
L5
Unit Part List
L3.
Side Part(L)
1 pc.
L4.
Side Part(R)
1 pc.
L5.
Bottom Part
1 pc.
(Fig) 2
(Fig) 3
(Fig) 4
Assemble the Pull Handle
with Machine Screw on
the Front Part (L1).
(Fig)2
(Fig)3
(Fig)4
Turn the assembled drawer over and slide the
Plywood Bottom Part (L5) into the grooves
on Side Parts (L1), (L3) and (L4). Be sure to push
the plywood all the way forward so it meets the
Front Part (L1).
Attach the Back Part (L2) to the assembled drawer. Using a
Philips screw driver, insert 1” screws (II) into each of the 4
pre-drilled holes in sides (L3) and (L4), then tighten all
screws.
L5
L3
L1
L4
L2
L2.
Back Part
1 pc.
L1.
Front Part
1 pc.
* If you are missing any of these
parts, please contact our DMI
Customer Service Department
at 1-877-831-0319 or fax us at
1-800-755-2878.
-
1
-
2
-
3
-
4
Home Styles 5040-95 Installation guide
- Type
- Installation guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Home Styles 5023-95 Assembly Instructions
-
-
-
-
-
-
-
Home Styles 9100-1062 Operating instructions
-
-
