Digimerge DBV53TL Quick start guide

Category
Security cameras
Type
Quick start guide

This manual is also suitable for

Digimerge DBV53TL is a high-quality outdoor IR dome camera with a resolution of 700 TVL and a 1/3” 960H image sensor. It features True Day/Night with Mechanical ICR, a 3.6mm wide-angle lens, and 65ft (20m) IR night vision. The camera is IP66 weatherproof rated and can operate in cold climates (down to -22°F/ -30°C). It also has a 3-axis design for wall/ceiling mounting and 12V DC operation.

With its high resolution and wide-angle lens, the Digimerge DBV53TL is ideal for a variety of surveillance applications, both indoors and outdoors.

Digimerge DBV53TL is a high-quality outdoor IR dome camera with a resolution of 700 TVL and a 1/3” 960H image sensor. It features True Day/Night with Mechanical ICR, a 3.6mm wide-angle lens, and 65ft (20m) IR night vision. The camera is IP66 weatherproof rated and can operate in cold climates (down to -22°F/ -30°C). It also has a 3-axis design for wall/ceiling mounting and 12V DC operation.

With its high resolution and wide-angle lens, the Digimerge DBV53TL is ideal for a variety of surveillance applications, both indoors and outdoors.

WARNING - A REGULATED UL / CSA APPROVED 12V DC power
supply is REQUIRED for use with this camera. Use of a non-regulated,
non-conforming power supply can damage this product and voids the
warranty.
Product Information
User Manuals
Quick Start Guides
Specification Sheets
Video Tutorials & Demos
Latest News
4 x Drywall Anchors
Contents
700TVL OUTDOOR
IR DOME CAMERA
MODEL: DBV53TL
QUICK START GUIDE
English Version 1.0
www.flirsecurity.com/pro
IT’S ALL ON THE WEB!
www.flirsecurity.com/pro
VISIT
FLIR Systems, Inc.
Copyright © 2014
As our products are subject to continuous improvement, FLIR Systems,
Inc. reserves the right to modify product design, specifications and
prices, without notice and without incurring any obligation. E&OE
Ultra Resolution Outdoor IR
Dome Camera
4 x Mounting Screws
Features
Safety Precautions
Use an appropriate low voltage power cable to prevent
fire or electrical shock.
Make sure to install the camera in an area that can
support the camera weight.
There are no user serviceable parts inside the camera.
Please do not disassemble the camera.
Do not clean the lens cover with an abrasive cleaning
material. Please use a soft cloth to clean the lens cover.
700 TVL Resolution, 1/3” 960H Image Sensor
True Day/Night with Mechanical ICR
3.6mm Wide Angle Lens
Cold Climate Capability (Operates to -22°F/ -30°C)
65ft (20m) IR Night Vision*
IP66 Weatherproof Rating**
3-Axis Design for Wall/Ceiling Mounting
12V DC Operation
* IR Illumination range under ideal conditions. Objects at or beyond
this range may be partially or completely obscured, depending on
the camera application
** Not intended for submersion in water. Installation in a sheltered
area is recommended.
Dimensions
Camera Specifications
Installing the Camera Setting up the Camera
Camera Base
1. Rotate the camera base counterclockwise to
separate it from the ball camera and dome
cover.
2. Feed the BNC / power cable through the camera
base.
3. Connect the video and power cable as shown in
the next section ‘Setting up the Camera’.
4. Mark the position of the 4 holes in the camera
base. Drill holes where marked.
5. OPTIONAL: Insert drywall anchors as needed.
6. Mount the camera base to the wall or ceiling
using the included screws.
7. Position the dome cover over the camera and
screw it clockwise halfway onto the camera
base.
8. Move the ball camera to the desired position.
While holding the ball camera firmly in place,
screw the dome cover the rest of the way
to secure it to the camera base. Holding the
camera prevents it from moving while installing
the dome cover.
95mm / 3.8”
70mm / 2.8”
1. Connect the BNC connector of the camera to
the video cable.
2. DC Power—Power Adapter: Connect a
12V DC Power Adapter (not included) to the
camera. Plug the Power Adapter into a local
power outlet.
DC Power—Power Pigtail (not included):
Connect a Power Pigtail to the camera.
Connect the terminating wires of the cable
directly to the DC power source.
NOTE: For pigtail connection with 12V DC, make sure
to check polarity specifications on the power adapter.
Image Sensor 1/3” 960H Image Sensor
Video Format NTSC
Effective Pixels H: 960 V: 480
Horizontal Resolution 700 TVL
Scan System 2:1 Interlace
Sync System Internal
S / N Ratio 48dB (AGC Off)
Iris AES
AES Shutter Speed 1/60 ~ 1/25,000 sec.
Min. Illumination 0.3 Lux without IR LED
0 Lux with IR LED
Video Output Composite 1.0Vpp @ 75ohm
Lens Focal Length / Type 3.6mm F2.0 / Fixed
FOV (Diagonal) 80°
Termination BNC Type
IR Range / Qty. 65ft / 20m; 20 IR LED’s
Power Requirement 12V DC ±10%
Power Consumption 12V: 270mA Max with IR LED
Operating Temp. Range –22° ~ 122°F / –30° ~ 50°C
Environmental Rating IP66
Dimensions (LxH) 2.8” x 3.8”
70mm x 95mm
Weight (including stand) 0.7lbs / 0.3kg
ATTENTION - Test the camera prior to selecting a permanent
mounting location by temporarily connecting the camera(s) and
cables to the DVR.
ATTENTION - This camera includes an Auto Mechanical IR Cut Filter.
When the camera changes between Day/Night viewing modes, an
audible clicking noise may be heard from the camera. This clicking is
normal, and indicates that the camera filter is working.
  • Page 1 1
  • Page 2 2

Digimerge DBV53TL Quick start guide

Category
Security cameras
Type
Quick start guide
This manual is also suitable for

Digimerge DBV53TL is a high-quality outdoor IR dome camera with a resolution of 700 TVL and a 1/3” 960H image sensor. It features True Day/Night with Mechanical ICR, a 3.6mm wide-angle lens, and 65ft (20m) IR night vision. The camera is IP66 weatherproof rated and can operate in cold climates (down to -22°F/ -30°C). It also has a 3-axis design for wall/ceiling mounting and 12V DC operation.

With its high resolution and wide-angle lens, the Digimerge DBV53TL is ideal for a variety of surveillance applications, both indoors and outdoors.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI