Triton Systems 9100 Series Owner's manual

Brand
Triton Systems
Model
9100 Series
Type
Owner's manual
Model 9100
QUICK REFERENCE GUIDE
TDN 07100-00079
THIS AREA FOR SERVICE PROVIDER
CONTACT INFORMATION:
Model 9100
(shallow cabinet)
Model 9100
(deep cabinet)
04/2007
2
1. AT ATM WELCOME SCREEN, PRESS AND HOLD DOWN <CTRL> KEY
(LOWER RIGHT CORNER OF KEYPAD), PRESS <1> KEY, THEN RELEASE
BOTH
KEYS. THE TOP MENU WILL BE DISPLAYED.
2. AT THE TOP MENU, SELECT MANAGEMENT FUNCTIONS OPTION.
ENTER PASSWORD TO ACCESS MANAGEMENT FUNCTIONS MAIN MENU.
THE MENU SCREEN (RIGHT) WILL BE DISPLAYED (ADMINISTRATION
PASSWORD ACCESS DISPLAYED).
RESET ATM: OPEN THE ATM CONTROL PANEL AND LOCATE THE ON /
OFF SWITCH ON THE UNIT’S POWER SUPPLY TOWARDS THE REAR OF THE
ENCLOSURE
. PRESS THE POWER SWITCH <OFF>, THEN <ON>.
RESET ERROR: AFTER AN ATM RESET, THE <RESET ERROR> AND
<MANAGEMENT FUNCTION> OPTIONS APPEAR. SELECT THE RESET ER-
ROR OPTION. IF THE PROBLEM HAS BEEN CORRECTED, THE ATM SHOULD
RETURN
TO NORMAL OPERATION.
PURGE: INSTRUCTS THE DISPENSER TO REMOVE ANY JAMMED NOTES IN
FEED
PATH. THE CODE DISPLAYED FOR A SUCCESSFUL PURGE IS ‘20 20 20’.
TEST DISPENSE: INSTRUCTS THE DISPENSER TO DISPENSE ONE (1)
NOTE FROM THE CASSETTE(S) INTO THE REJECT CASSETTE/TRAY/COMPART-
MENT.
MANAGEMENT FUNCTIONS
- ACCESS INSTRUCTIONS -
RESETTING ERRORS
DIAGNOSTICS
ACCESS MANAGEMENT FUNCTIONS USING ACCESS INSTRUCTIONS. SELECT
DIAGNOSTICS FUNCTION.
TEST RECEIPT PRINTER: TESTS THE OPERATION OF THE RECEIPT PRINTER AND PRINTS A TERMINAL CONFIGURA-
TION SUMMARY.
THE CODE DISPLAYED FOR A SINGLE CASSETTE TDM SUCCESSFUL TEST DISPENSE IS ‘20 1 0 0 0’ AND FOR A MULTI-
CASSETTE TDM, ‘20 1 1 0 0’. THE CODE FOR AN SDD OR MINIMECH DISPENSER IS ‘20 20 21’.
3
DAY CLOSE: USED TO COMPLETE DAILY BALANCING OF THE ATM WITH
THE
HOST PROCESSOR. THE PRINTED INFORMATION INCLUDES A TOTAL OF ALL
TRANSACTIONS
SINCE THE LAST DAY CLOSE. TOTALS ARE CLEARED AND
SWITCHED
TO THE NEXT BUSINESS DAY.
FOR UNITS THAT HAVE AN SDD OR MINIMECH INSTALLED, YOU MAY PRINT UP
TO
THE LAST 2045 ENTRIES. WHEN THIS OPTION IS SELECTED, ENTER A
NUMBER
BETWEEN 1 AND 2045.
THIS FUNCTION SETS THE DESIRED CASSETTE(S) IN SERVICE OR OUT OF
SERVICE. THE CASSETTES MUST BE IN SERVICE TO ALLOW THE DIS-
PENSER TO ACCESS THE CURRENCY.
ERROR CODE 156: THIS ERROR APPEARS ON THE DISPLAY WHEN THE
CASSETTES
ARE DEPLETED OF CURRENCY OR HAVE BEEN PLACED “OUT OF
SERVICE”.
EXAMPLE: ENTERING THE NUMBER 30 WILL PRINT OUT THE LAST 30 TRANSACTION/EVENTS THAT HAVE OCCURRED.
CLOSE
ACCESS MANAGEMENT FUNCTIONS USING A CCESS INSTRUCTIONS. SELECT
CLOSE FUNCTIONS.
JOURNAL
- PRINT LAST X -
ACCESS MANAGEMENT FUNCTIONS USING A CCESS INSTRUCTIONS. SELECT
THE
JOURNAL OPTION. SELECT PRINT LAST X.
TRIAL CLOSE: THIS OPTION FUNCTIONS LIKE A DAY CLOSE EXCEPT THE TOTALS ARE NOT CLEARED.
FOR UNITS THAT HAVE TDMS INSTALLED, YOU MAY PRINT UP TO THE LAST 1024 ENTRIES. ENTER A NUMBER BETWEEN
1 AND 1024.
CASSETTE SERVICE
(Multi-Cassette only)
AFTER REPLACING/RELOADING THE CASSETTES (IF CURRENCY WAS DEPLETED), SELECT THIS FUNCTION TO PLACE THE
CASSETTE
(S) “IN SERVICE”, THEN EXIT OUT OF MANAGEMENT FUNCTIONS AND SELECT RESET ERROR OPTION.
4
CASSETTE CLOSE
REPLENISH
CASSETTE PROCEDURES
55
33
22
11
44
66
77
NOITPIRCSEDESOLCETTESSAC
PETSNOITPIRCSED
1 .noitpo"ESOLC"tceleS.snoitcurtsnisseccAgnisusnoitcnuFtnemeganaMsseccA
2.noitpo"ESOLCETTE
SSAC"tceleS
3 .)resnepsidettessac-itlum("B"/"A"ro)resnepsidettessacelgnis("A"ettessaCrehtietceleS
4
noyti
vitcallagnizirammusdetnirpeblliwtroperA."ESOLCETTESSAC"tceles,snoitpoB/A:ettessaCrednU
nisllibforebmun
ehtsteseroslatI.slatotehtsraelcdnaesolCettessaCtsalehtecnisettessacdetceleseht
.)0(OREZotettessaceht
5
."ERUDECORPETTESSACHSINELPER"ehtmrofreP retfA."tuoemit"lliwsnoitcnuftnemeganaM:etoN
.petstxenehtsseccao
t3hguorht1spetsmrofrep,serudecorptnemecalperettessacgnitelpmoc
6
ehtretnE."ETTESSACNI.YTQRETNE"tceles,s
noitpoB/A:ettessaCrednU LATOTeratahtsetonforebmun
,ettessactahtniTON!eulaveht
7
ehtseifirevnoitpoesolCettess
aClairTehT."ESOLCETTESSACLAIRT"tceles,snoitpoB/A:ettessaCrednU
slatotehT.stroperesolCettessaCrofecnere
ferasadesuoslasidnapetssuoiverpnideretnesetonforebmun
DERAELCTONERAettessacehtdnaTESERTONSI.rossecorptsoh
ehtotdetropertoneraslatotehT.
SI)S(ETTESSACEHTYFIREV:ETON"ECIVRESNI" .TNEMHSINELPERETTESSACFONOITELPMOCR
ETFA
5
3
1
2
4
6
STEP
ACTION
STEP
ACTION
7
5
8
REPLENISH TDM CASSETTE(S)
REMOVE REJECT CASSETTE. UNLOCK AND REMOVE
ANY
NOTES. DO NOT RECYCLE REJECT NOTES!
REMOVE NOTE CASSETTE(S). UNLOCK AND SLIDE
PACKER
PLATE TOWARDS REAR OF CASSETTE.
LOCATE THE SPRING-LOADED LOCKING PIN ON THE
UNDERSIDE
OF THE TRAY. PULL THE PIN DOWN AND
ROTATE
SWIVEL PLATFORM 180° CLOCKWISE.
UNLOCK/OPEN SECURITY DOOR. EXTEND THE DIS-
PENSER MOUNTING TRAY.
NOTE: TDM-100 HAS A FIXED TRAY ASSEMBLY.
RELEASE PIN TO LOCK IN
PLACE
.
LOCK AND REINSTALL
REJECT
CASSETTE.
PLACE CURRENCY IN THE CASSETTE AND SLOWLY
RELEASE
THE HOLD-BACK LATCH. ALLOW PLATE
TO
MOVE FORWARD.
SLIDE THE CASSETTE(S) BACK INTO THE DIS-
PENSER. PULL THE PIN DOWN AND ROTATE THE
SWIVEL
PLATFORM 180° COUNTERCLOCKWISE.
COUNT THE NUMBER OF BILLS THAT REMAIN IN
THE
CASSETTE, IF ANY.
COUNT THE NUMBER OF BILLS THAT ARE BEING
ADDED
TO THE REMAINING NOTES.
THE TOTAL NUMBER OF NOTES WILL BE THE
NUMBER
ENTERED IN THE “ENTER QTY. IN CAS-
SETTE” PROMPT.
PUSH THE DISPENSER MOUNTING TRAY (IF APPLI-
CABLE) BACK INTO THE CABINET.
LATCH IN PLACE WITH
THE
HOLD-BACK LATCH.
CLOSE AND LOCK THE
CASSETTE
.
RELEASE PIN TO LOCK
IN
PLACE.
CLOSE AND LOCK THE
SECURITY
DOOR.
6
UNLOCK/OPEN SECURITY
DOOR
. GRASP HANDLE
ON
CASSETTE WHILE
HOLDING
MECHANISM.
REMOVE CASSETTE.
PLACE ON A FLAT SUR-
FACE.
USE CASSETTE KEY TO
“PRIME” CASSETTE.
3
1
2
4
SLIDE CASSETTE ON TO
THE
LOADING TRAY.
5
6
STEP ACTION
STEP
ACTION
LIFT REJECT TRAY. PUSH PACKER PLATE TO REAR
AND
LATCH.
LOAD CURRENCY. UNLATCH PACKER PLATE AND
SLIDE
TOWARDS CURRENCY.
CLOSE THE LID.
LIFT LID. CHECK RE-
JECT TRAY AND REMOVE
ANY
NOTES.
7
8
REMOVE CASSETTE
FROM
LOADING TRAY.
REPLENISH SDD CASSETTE
Cassette “primed”
Green window
COUNT THE NUMBER OF BILLS THAT REMAIN IN
THE
CASSETTE, IF ANY.
COUNT THE NUMBER OF BILLS THAT ARE BEING
ADDED
TO THE REMAINING NOTES.
THE TOTAL NUMBER OF NOTES WILL BE THE
NUMBER
ENTERED IN THE “ENTER QTY. IN CAS-
SETTE” PROMPT.
Red window
Cassette
“unprimed”
DO NOT RECYCLE RE-
JECT NOTES!
USE CASSETTE KEY TO AGAIN “PRIME” CAS-
SETTE (STEP 2).
REINSTALL CASSETTE IN
DISPENSER
.
(CASSETTE AUTOMATI-
CALLY BECOMES
“UNPRIMED” - RED WIN-
DOW).
CASSETTE MUST BE
“PRIMED” TO INSTALL
IN
DISPENSER AND LOAD-
ING TRAY!
7
3
1
2
4
5
STEP
ACTION
STEP
ACTION
6
UNLOCK/OPEN SECU-
RITY DOOR. GRASP
TRAY
HANDLE AND RE-
MOVE THE NOTE TRAY
FROM
THE DISPENSER.
REMOVE ANY REJECTED
NOTES
FROM THE RE-
JECT COMPARTMENT.
MOVE THE PUSHER
PLATE
TO THE REAR OF
THE
TRAY (TOWARDS
THE
HANDLE).
REPLENISH MINIMECH CASSETTE
PLACE ON A FLAT SURFACE.
DO NOT RECYCLE RE-
JECT NOTES!
COUNT THE NUMBER OF BILLS THAT REMAIN
IN
THE CASSETTE, IF ANY.
COUNT THE NUMBER OF BILLS THAT ARE BE-
ING ADDED TO THE REMAINING NOTES.
THE TOTAL NUMBER OF NOTES WILL BE THE
NUMBER
ENTERED IN THE “ENTER QTY. IN CAS-
SETTE” PROMPT.
GRASP THE HANDLE
AND
SLIDE THE NOTE
TRAY
FULLY INTO THE
DISPENSER
.
LOAD CURRENCY.
SLOWLY PUSH PACKER
PLATE
TOWARDS CUR-
RENCY.
8
1
4
7
2
5
8
3
6
STEP
ACTION
STEP
ACTION
ACTIONSTEP
REPLACING RECEIPT PRINTER PAPER
PRESS FEED BUTTON TO
CLEAR
PAPER FROM FEED
PATH
CUT REMAINING PAPER
TO
ALLOW REMOVAL
LIFT SPINDLE TO RE-
MOVE PAPER ROLL AND
SPINDLE
PLACE NEW PAPER ROLL ON
BRACKET
. MAKE SURE
PAPER
FEEDS FROM TOP!
FEED PAPER END INTO
PRINTER
FEED SLOT
PLACE SPINDLE IN NEW
PAPER
ROLL
REMOVE SPINDLE FROM
DEPLETED
PAPER ROLL
PAPER WILL FEED
AUTOMATICALLY
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Triton Systems 9100 Series Owner's manual

Brand
Triton Systems
Model
9100 Series
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents