P/N ASTX5CPXX
USER GUIDE
Stereo Transmitter Pro
(Tx Pro)
Bluetooth Wireless
Declaration of Conformity. We declare that product
ASTX5CPXX conforms to the R&TTE Directive 1999/5/RC.
0678
R
201WW08215106
FCC ID:TNZSTX3C2XXX
T
r
a
n
s
m
i
t
t
e
r Pro
Contact your local dealer immediately if
anything is missing or damaged.
Unpack the package carefully and confirm
that you have all of parts as shown below.
GETTING STARTED
USB charging cableTransmitter Pro
This Bluetooth stereo transmitter (Tx Pro)
offers the latest innovation in Bluetooth
technology. It can transfer stereo audio
from music or audio source such as MP3,
TV or Apple iPod to Bluetooth stereo
speaker, headphone or receiver wirelessly.
INTRODUCTION
Before using the Tx Pro, you must charge it
for approximately 2 hours. After fully
charged, the battery provides up to 5~6
hours of music transferring time.
CHARGING
See image below. Please note some
models of Tx Pro will differ slightly in style,
color and the functionality may vary accord-
ing to their specifications.
PRODUCT OVERVIEW
USB Charging
Power Switch
Multilink Button
Connector 3.5mm
Audio Plug
Off On Multi
Plug the USB charging cable into micro
USB connector on Tx Pro and plug the
other side of the USB charging cable into a
powered USB connector.
The amber LED will be lighted during charg-
ing and be off or dim after charging
completed.
or
POWER ON/OFF
To turn off Tx Pro - Slide the Power
switch to “Off”, the unit and LED will be off.
To turn on Tx Pro - Slide the Power
switch to “On”, the blue LED will flash to
indicate turned on.
Off On Multi
On MultiOff
Important Note: Tx Pro support four sets
of pin code: 0000, 1111, 1234, and 8888. It
covers the most of popular stereo speak-
ers, headphones or receivers.
1. Turn on the Tx Pro, the blue LED will
flash quickly and enters pairing mode.
3. The Tx Pro will pair and connect
Bluetooth stereo device automatically. The
blue LED will flash in middle speed to
indicate paired and connected.
PAIRING
2. Put the Bluetooth stereo speaker,
headphone or receiver into pairing state.
Refer to the Bluetooth stereo speaker,
headphone or receiver user guide for
instructions for this feature.
Note: If anything unexpected happened,
and the music can’t stream out from Tx Pro,
user should restart the Tx Pro (by power off
and power on).
2. Place the stereo speaker, headphone or
receiver to Tx Pro within 10 meters and
receive stereo audio or music from Tx Pro
wirelessly.
STREAMING MUSIC
1. After connected, plug Tx Pro into the
audio jack on stereo audio or music source.
AUDIO
OUTPUT
Off On Multi
If you like to connect 2nd stereo speaker,
headphone or receiver when the 1st device
is connected, click the multilink (Multi)
button, Tx Pro will start to pair and connect
the 2nd device.
The pairing procedure is same as the first
one. After paired and connected with 2nd
device, Tx Pro will transmit audio/music to 2
Bluetooth stereo speakers, headphones or
receivers at same time.
Pair and connect to the 2nd Bluetooth device
With multilink, Tx Pro can pair and connect
upto 2 Bluetooth stereo speakers,
headphones or receivers at same time.
MULTIPLE LINKS
Off On Multi
Note:
1. The audio of 1st device will be interrupted
while pairing 2nd Bluetooth device. Both audio
will be restored automatically after 2nd
Bluetooth device connected completely.
2. If you had paired with two devices, Tx Pro
always connects to the latest paired device on
next power on. After one device connected,
click multilink (Multi) button, Tx Pro will connect
another paired device automatically.
VISUAL INDICATION
The LED can indicate the working status of
Tx Pro.
TROUBLESHOOTING
Please note that you should also be familiar
with the operation of your Bluetooth stereo
speaker, headphone or receiver. Please
read your Bluetooth stereo speaker,
headphone or receiver user guide carefully.
Please note that the Tx Pro will only work
and support the Bluetooth A2DP profiles.
Statues Indication
Charging Amber LED solid on
Power on
Blue LED
solid on
Power off LED off
Transmitter paring Blue LED
fast flashing
Transmitter
connected
Transmitter
standby
Blue LED
middle
speed flashing, approx.
every 2 seconds
Blue LED
low speed
flashing, approx.
every 5 seconds
• Check battery power
and charge the unit
• Check power of your
Bluetooth stereo device
• Check the pin code of
the Bluetooth stereo
device, refer to the user
guide
• Ensure the Bluetooth
stereo device is within
range
When power on,
no LED flashing
Tx Pro with blue
LED quick
flashing but no
connection to
Bluetooth
stereo
speaker,
headphone or
receiver
Solution
Problem
For other Alead Bluetooth products or
supporting, please view our website
www.aleadinc.com or email
or contact your local
representative.
CUSTOMER SERVICE INFORMATION
Do not throw this electrical device away with
the normal household waste at the end of its
life, but hand it in at an official collection
point for recycling. By doing this you will help
will help to preserve the environment.
ENVIRONMENT
Whilst every effort has been made to ensure
that the information in this manual is
accurate and complete, no liability will be
accepted for any errors and/or omissions
made. The manufacturer reserves the right
to make changes and improvements to the
specifications and features of the hardware
and firmware of the products described in
this document without prior notice. Repro-
duction, transfer, distribution or storage of
part or all of the contents in this document in
any form is prohibited without prior permis-
sion of the manufacturer. All trademarks
acknowledged.
DISCLAIMER
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Mee Audio Connect Universal Dual Headphone Bluetooth Wireless Audio Transmitter AF-T1 / AF-T1B User manual
-
-
-
ALLOYSEED BTI-029 User manual
-
ClearSounds QLinkTV User manual
-
-
Beyerdynamic Unite User manual
-
Scosche Industries IBHPK User manual
-
jWIN I903 User manual
-
Sena SPH10H-FM User manual
