ARMIN STROM – MANUAL - CALIBRE AMW11
INSTRUCTIONS FOR USE
Thank you for buying an Armin Strom watch.
Developed and manufactured in-house, the AMW11 calibre of your watch is a
manually wound mechanical movement with a five-day power-reserve.
To guarantee the perfect working of your watch for many years to come, please pay
careful attention to the recommendations for use set out in these instructions.
Hours Minutes
Position 1: winding
Position 2: setting the time
Seconds
WINDING
Your manual mechanical watch must be wound regularly for it to work properly. To
do so, turn the crown clockwise in position 1 until it locks, which indicates that the
movement is completely wound. It is important to never put strain on the crown,
since this could damage the mechanism.
When fully wound, your watch has a minimum power-reserve of five days. Your
watch must be wound regularly for it to work properly.
SETTING THE TIME
Pull the crown out to position 2. Adjust the hours and minutes by turning the crown
forwards or backwards.
Important: Always push the crown back to position 1 once the settings have been
made.
/
