Page is loading ...
INSTRUCTIONS FOR USE
MANUAL
CALIBRE AMW11
Thank you for buying an Armin Strom watch.
Developed and manufactured in-house, the
AMW11 calibre of your watch is a manually
wound mechanical movement with a five-day
power-reserve.
To guarantee the perfect working of your watch for
many years to come, please pay careful attention
to the recommendations for use set out in these
instructions.
HOURS
MINUTES
SECONDS
WINDING
Your manual mechanical watch must be wound
regularly for it to work properly. To do so, turn
the crown clockwise in position 1 until it locks,
which indicates that the movement is complete-
ly wound. It is important to never put strain on
the crown, since this could damage the mech-
anism.
When fully wound, your watch has a minimum
power-reserve of five days. Your watch must be
wound regularly for it to work properly.
1 2
SETTING THE TIME
Pull the crown out to position 2. Adjust the
hours and minutes by turning the crown for-
wards or backwards.
Important: Always push the crown back to posi-
tion 1 once the settings have been made.
ARMIN STROM AG
Bözingenstrasse 46
CH-2502 Biel/Bienne
Switzerland
Tel. +41 (0) 32 343 33 44
Fax +41 (0) 32 343 33 40
WWW.ARMINSTROM.COM
Facebook: www.facebook.com/arminstrom
Twitter: www.twitter.com/arminstrom
Instagram: www.instagram.com/arminstrom
/
