SEI HZ1021R0TX Assembly Instructions Manual

For assistance with assembly, contact:

Southern Enterprises, Inc.

Customer Service 1-800-633-5096

[email protected]om

wwww.seidal.com

Supports up to 100Lb

Fold- Away Bar

HZ1020R0TX- Walnut

HZ1021R0TX- Black

Assembly Instructions

Suggested tools: Phillip head screw driver, power drill, 3/16” drill bit, 24”

level, and a tape measure. Unit needs to be hung on wall stud for more

security and stability.

A Quantity

of 1

Top Panel

B Quantity

of 1

Left Door

C Quantity

of 1

Right Door

D Quantity

of 1

Left Panel

E Quantity

of 1

Right Panel

F Quantity

of 1

Top Shelf

G Quantity

of 1

Bottom Shelf

H Quantity

of 2

Drawer

I Quantity

of 1

Middle Panel

J Quantity

of 1

Base

K Quantity

of 1

Top Back Panel

L Quantity

of 1

Middle Back Panel

M Quantity

of 1

Lower Back Panel

Assembly Tool Required

No.2 Phillips Screwdriver (Not Included)

HZ1020R0TX

-

W

alnut

/

HZ1021R0TX

-

B

lack

Fold-Away Bar

Parts List

Please check packaging for all parts and hardware before discarding. Unpack and lay parts on

clean, padded surface like carpet or blanket. Check that you have all parts indicated. Call customer service

if hardware is missing. Before beginning assembly, carefully study the diagrams below and sort your

hardware according to the pictures. Using the incorrect hardware will cause damage.

1 Quantity

of 10

Cam Bolt

2 Quantity

of 10

Cam Lock

3 Quantity

of 10

Wood Dowel

4 Quantity

of 4

Cam Bolt

5 Quantity

of 4

Long Machine Screw

6 Quantity

of 4

Nut

7 Quantity

of 12

Wood Screw

8 Quantity

of 26

Phillip Screw

9 Quantity

of 2

Wall Anchor

10 Quantity

of 2

Wood Screw

11 Quantity

of 2

Knob

12 Quantity

of 2

Bolt

13 Quantity

of 1

Flat Washer

Care and Cleaning Instructions:

Before using, wipe with a clean, dry cloth.

Periodically apply furniture wax to renew

the finish . Avoid rubbing or scratching the

surface with rough or abrasive objects.

For replacement parts or questions, please

call customer service at 1-800-633-5096.

Assembly Tool Required

No.2 Phillips Screwdriver (Not Included)

HZ1020R0TX

-

W

alnut

/HZ1021R0TX

-

B

lack

Fold-Away Bar

Hardware List

Please check packaging for all parts and hardware before discarding. Unpack and lay parts on

clean, padded surface like carpet or blanket. Check that you have all parts indicated. Call customer service

if hardware is missing. Before beginning assembly, carefully study the diagrams below and sort your

hardware according to the pictures. Using the incorrect hardware will cause damage.

Figure 1

Attach top shelf (F) and bottom

shelf (G) to middle panel (I) by

using cam bolts (1), cam locks (2),

and wood dowels (3) as shown.

Turn the cam locks clockwise to

secure panels in place.

Figure 2

Attach left panel (D) and right panel

(E) to top shelf (F) and bottom shelf

(G) by using cam bolts (1), cam

locks (2), and wood dowels (3) as

shown.

Turn the cam locks clockwise to

secure panels in place.

HZ1020R0TX

-

W

alnut

/HZ1021R

0TX

-

B

lack

Fold-Away Bar

Assembly Instructions

HZ1020R0TX

-

WALNUT/HZ1021R0TX

-

BLAC

K

Figure 3

Attach top panel (A) and base (J) to

left panel(D) and right panel (E) by

using cam bolts (1), cam locks(2)

wood dowels(3),long bolts(5) and

flat washer (6) as shown.

Figure 4

Attach left door (B) and right

door(C) to top panel (A) and base

(J) by using wood screws (7) as

shown.

HZ1020R0TX

-

W

alnut

/HZ1021R0TX

-

B

lack

Fold-Away Bar

Assembly Instructions

Figure 5

Attach top back panel (K), middle

back panel (L) and lower back

panel (M) to the back of the unit by

using Phillip screws (8) as shown.

Figure 6

Please mount at least 1 screw

into a wall stud. Wall anchor is

not needed when screwing

directly into a wall stud.

Measure the wall and mark the

location of the center of

each mounting holes.

Using the level, make sure that

all marks are level on the wall.

Using power drill and

3/16_drill bit, drill two 3/16_ holes

through the wallboard at the

mounting hole marks.

HZ1020R0TX

-

W

alnut

/HZ1021R0TX

-

B

lack

Fold-Away Bar

Assembly Instructions

Figure 7

Attach knobs (11) to left door (B)

and right door(C) by using 2 pcs

bolt (12),then, attach to the wall by

using wall anchors (9), wall screws

(10) and flat washers (13) as

shown.

Insert drawers (H) as shown.

HZ1020R0TX

-

WALNUT/HZ1021R0TX

-

BLACK

FOLD-AWAY BAR

Assembly Instructions

Please immediately examine this product carefully. Any request for missing parts or damage replacement must

be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this

time frame. Parts will not be available for items arriving fully assembled. We do not recommend modifying

product(s) and we are not responsible for any damages due to product modification(s).

If damages or missing

parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or replacement

merchandise.

Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central

time if you have product issues or email us at [email protected]. Please ask for customer service

representative for issues involving damages or replacement parts. Please ask for technical assistance

representative for any issues with product and assembly/construction.

Please contact the retailer that you purchased from for returns.

Customer Information

Name

Address

City/State/Zip Code

Phone Number

Please indicate where you purchased this item: Store/Website/Catalog

Please indicate color/size/style number:

Style No Parts Letter Parts Description Quantity Needed

Customer Service 1-800-633-5096

[email protected]om

Southern Enterprises, Inc.

600 Freeport Parkway, Suite 200

Coppell, Texas 75019

Parts Replacement Form

SEI HZ1021R0TX Assembly Instructions Manual

This manual is also suitable for

SEI HZ1021R0TX Assembly Instructions Manual

Related papers

Other documents