CORNER SHELF INSTRUCTIONS

HARDWARE PROVIDED

HARDWARE REQUIRED

Place unit in desired location and mark the locations of the holes on the wall. Remove shelf, drill 1/4” holes at the

marked locations, and insert the four wall anchors. Place unit back into position and use a #2 Phillips screwdriver to

secure the four #8 x 1 in. pan head screws through the shelf into the wall anchors.

© 2021 The AMES Companies, Inc. | Orlando, FL 32827 | 1-800-874-0008 | www.closetmaid.com8282 01/21

x4 x4

1/4 in. Drill Bit Drill#2 Phillips