4 Use tab #1 to peel the back lm o of the
screen protector, then discard the lm.
Note: Make sure not to touch the adhesive
side of the lm during the installation process.
5 Align the top of the screen protector with
the top of the phone, then press it down
from top to bottom to adhere.
6 If there are bubbles, press them out toward
the edges of the screen protector using the
scratch card.
7 Use tab #2 to peel the blue lm o of the
screen protector, then discard the lm.
8 Reattach your phone case (if needed), then
remove ngerprints with the polishing cloth.
90-day limited warranty:
Visit www.dynexproducts.com for details.
Contact Dynex:
For customer service, call 1-800-305-2204 (U.S.
and Canada) or 01-800-926-3020 (Mexico)
www.dynexproducts.com
DYNEX is a trademark of Best Buy and its aliated companies.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2018 Best Buy. All rights reserved.
Made in China
V3 ENGLISH 18-0387
Tab #1
Screen protector
Scratch card