4 Push the alignment tool onto your phone until it
snaps into place.
5 Use tab #1 to peel the back lm o the screen
protector, then discard the lm.
6 Align the top of the screen protector with the
alignment tool, then press it down from top to
bottom to adhere.
7 Remove the alignment tool.
8 If there are bubbles, press them out toward edges
of the screen protector.
9 Reattach your phone case (if needed), then
remove ngerprints with the polishing cloth.
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 877-467-4289
(U.S. and Canada)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2022 Best Buy. All rights reserved.
V4 ENGLISH 22-0921
Alignment tool
NS-IP20GLS2P_IP20PGLS_22-0921_QSG_V4_EN_Final.ai 2 11/22/2022 3:33:15 PM