2. Baxton Studio
  3. BBT5454-Maya-Cream/Walnut-Stool

Baxton Studio BBT5454-Maya-Cream/Walnut-Stool Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the Stool BBT5454. This document provides a detailed guide, including a parts list, hardware list, and step-by-step diagrams with cautions to avoid over tightening. I'm ready to answer any questions you might have about assembling your stool.
  • What tool is needed for assembly?
    Should I fully tighten all bolts immediately?
    What should be avoided during the process?
HARDWARE LIST (BOX : 1)
ITEM DESCRIPTION QTY
1JCBC BOLT M6 x 60mm 8 PCS
2 M6 FLAT WASHER 8 PCS
3 M6 SPRING WASHER 8 PCS
4WOOD SCREW M4 x 38mm 4 PCS
5 M4 ALLEN KEY (BALL SHAPE) 1 PC
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS : 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tool needed : Screwdriver & Rubber Mallet (not provided).
ASSEMBLY INSTRUCTIONS
MODEL : BBT5454 STOOL 1 OF 2
STEP 1 STEP 2
B
C
5132
PART LIST
ITEM DESCRIPTION BOX QTY
A CHAIR 1 1 PC
B LEG FRAME 1 1 PC
C LEG 1 4 PCS
ASSEMBLY INSTRUCTIONS 2 OF 2
STEP 3 STEP 4
A
4
STEP 5
/