EXPLODED VIEW
INSTALLATION
1) Bracket & Camera Mounting
- Affix the bracket to the mounting surface.
- Drill up the supplied screws on the mounting surface through the holes on the bracket.
2) Power Connect & Monitor Impedance
- DC12V/1.5A regulated power supply
- To avoid fire or shock hazard, must use a UL listed power supply.
- Set the monitor impedance switch to 75. Check the impedance switch when the screen turns blurred.
3) Sun-shield Mounting
- Cap over the camera with the sun-shield.
4) Adjust picture direction pan & tilt
- Caution! To avoid smear, never face the camera directly to the strong light source such as sun or spot light.
SUN SHIELD
WINDOW RING
BASE RING
BRACKET
BODY RING
VIDEO
POWER
Near
Wide Tele
Far BRIGHT DARK
(VIEWING ANGLE)
(FOCUS)
Long Range IR Camera