Mee-go Ladybird Sit & Ride User manual

Brand: Mee-go

Model: Ladybird Sit & Ride

Type: User manual

Ladybird Sit & Ride

Instruction Manual

Important Safety Information

IMPORTANT - KEEP THESE INSTRUCTIONS FOR FUTURE USE.

This Sit & Ride is intended for children who can walk independently up to a

maximum weight of 20kg.

WARNING: NEVER LEAVE YOUR CHILD UNATTENDED.

WARNING: BEFORE USING THE PRODUCT, MAKE SURE THAT ALL THE LOCKING

DEVICES ARE ENGAGED.

WARNING: IN ORDER TO AVOID ANY INJURIES, MAKE SURE THAT YOUR CHILD IS

REMOVED AND AWAY FROM THE SIT & RIDE WHILE ADJUSTMENTS ARE BEING

MADE.

WARNING: DO NOT ALLOW THE CHILD TO PLAY WITH THE PRODUCT.

WARNING: THIS PRODUCT IS NOT SUITABLE FOR RUNNING OR ROLLER SKATING.

WARNING: NEVER LIFT/CARRY THE CHASSIS WHILE OCCUPIED.

WARNING: DO NOT USE THE SIT & RIDE ON STEPS, STAIRS, CURBS OR

ESCALATORS.

WARNING: ALWAYS USE ATTACHED TO THE REAR OF THE PUSHCHAIR.

WARNING: DO NOT USE IF THE BRAKE FUNCTION ON THE PUSHCHAIR IS

HINDERED.

CAUTION:

• Contact your local Mee-go stockist immediately should any components

become damaged.

• Before proceeding with the mounting operations, make sure that the product

and all its components are in working order, if they are damaged, the product

should not be used.

• This product is intended for use for children who can walk independently up to a

maximum weight of 20kg.

• While assembling the Sit & Ride make sure that your child stays at a safe

distance.

• There may be some brands of pushchairs that the Sit & Ride is not suitable for,

consult your Mee-go stockist if in doubt.

• Before each use ensure the Sit & Ride is correctly attached to the chassis.

• Do not use in snow or on soft surfaces.

• Always ensure that pushchair handles are held securely when your child is using

the Sit & Ride.

• This product is not a toy.

• Ensureyourchild’sngersandotherbodypartsareclearwhenmakingany

adjustments to the Sit & Ride.

• Always apply the brake on the pushchair when stationary.

• Check regularly that all the components of the Sit & Ride are in good working

order and safe.

• Never use force to adjust the movable elements of the Sit & Ride.

• Never attach or hang anything from the Sit & Ride.

• Never leave the pushchair and Sit & Ride with the child on a inclined surface

even if the parking device is engaged.

• NeverleavetheSit&Ridewiththechildnearswimmingpools,stairsandre.

• Keep the plastic parts of the packaging away from the child to prevent the child

from choking.

CLEANING AND MAINTENANCE.

• The fabrics can be cleaned with a wet sponge or cloth, using a mild detergent

and warm water.

• Regularly check bolts and fastenings etc. to ensure they are secure. Replace any

parts which look damaged or in an inferior condition.

• When using this Sit & Ride during the winter or by the sea it is important to

clean using clean fresh water and always dry thoroughly. Salt water

and salt and grit from the roads will corrode metal parts unless removed.

• A silicone spray can be used to lubricate moving parts.

• Do not expose the product to excessive sunlight for extended periods of time.

Should you nd a defect with this product:

Please keep your original receipt of purchase safe as it will be required should you

unfortunatelyndadefect.Thereceiptmustshowthedateofpurchaseclearly.

Shouldyoundadefectwiththisproductyoumustrstcontacttheoriginalplace

of purchase. Repairs to any part of this product do not extend the warranty period.

Do not return your product direct to the manufacturer.

Warranty information:

For full warranty details please visit http://www.mee-go.co.uk/warranty/

To register your warranty:

Please visit http://www.mee-go.co.uk/register/

1. PARTS LIST.

1. Non slip sit & ride board.

2. Levelling adjuster.

3. Seat.

4. Wheels.

5. Seat post.

6. Nuts and bolts.

7. Spanner and screw driver.

8. Handle bars.

(Connector blocks and extension arms come folded underneath the base board.)

2. ASSEMBLY INSTRUCTIONS.

1. Remove all packaging and ensure all parts are correct (see parts list). Insert the

seat into the seat post. Using the nut and bolt, screw driver and spanner, secure the

posttightly(g.1).

2. Insert the handle bars into the seat section. Using the nut and bolt, screw driver

andspanner,securethehandlebarstightly(g.2).

CAUTION! ENSURE THE SCREWS ARE SECURED TIGHT BEFORE USE.

3.Unscrewtheknobfromthebottomoftheseatpost(g.3).

4. Unfold the connector blocks and extension arms from underneath the non slip

board.Insertthehandlebarandseatsectionintothebaseofthesit&ride(g.4).

5. Attach the knob back onto the seat post from the underside of the sit & ride and

ensureitissecuredtightly(g.5).

6.Pressthebuttonontheconnectorblockstoreleasetheconnectorstraps(g.6).

7. Attach the connector straps around the upright rear legs of the chassis and push

backintotheconnectorblockuntiltight(g.7).

CAUTION! ENSURE THE CONNECTOR STRAPS ARE SECURE BEFORE USE. ALWAYS

ATTACH THE CONNECTOR STRAPS TO THE REAR UPRIGHT LEGS OF THE CHASSIS.

8. Adjust the sit & ride base using the adjusters located at the front side of the base

(g.8)untilthesit&rideislevel(g.9).

11. The sit & ride can be unattached from the chassis without having to remove

the connector blocks for ease of use. Press the button on the side of the connector

blocktoreleasetheclipandremovetheboard(g.10).

Fig. 1.

Fig. 4.

Fig. 7.

Fig 10.

Fig. 2.

Fig. 5.

Fig. 8.

Fig. 3.

Fig. 6.

Fig.9.

Mee-go Ltd

Unit 5, Wharf Street,

DewsburyWF129AU

T:01924485552

E: inf[email protected]

W: www.mee-go.co.uk

September 2017.

Mee-go Ladybird Sit & Ride User manual

Brand: Mee-go

Model: Ladybird Sit & Ride

Type: User manual

Download PDF

report

Mee-go Ladybird Sit & Ride User manual

Mee-go Ladybird Sit & Ride User manual

Related papers

Other documents