suptek A3 User manual

Brand: suptek

Model: A3

Type: User manual

suptek A3

The suptek A3 is a full-featured TV bracket that can hold TVs from 23” to 55” and weighing up to 100 lbs. It is made of durable metal and has a low profile of 8-50CM. The A3 comes with all the necessary hardware for installation, including a metal detector, screwdriver, pencil, impact drill, 10MM drill bit, wrench, cable ties, hooks, hook protectors, washers, and a bubble level.

The A3 is easy to install and can be mounted on wood or concrete walls. It features three height options for hanging the TV, so you can find the perfect viewing angle. The A3 also comes with cable ties to help you manage your cables and keep your entertainment area tidy.

suptek A3

100 lbs.

(45 kg)

Profile:8-50CM

Full-featured

TV Bracket

Model:A3

Parts List Screw Package

①Bracket x1

②Paperboard

for punching x1

(4)Self-tapping

screw-A

(4)Plastic expansion

screw-B

(4)M8x25 -F

(4)Φ8x14x6

Higher spacer-G

(4)Φ8x14x11

Higher spacer-H

(4)Φ5 Washer-I (4)Φ6 Washer-J (1)Bubble level-K

(4)M5x25 -D (4)M6x25 -E

③Cable tie x3

④Hook x2

⑤Hook protectorx2

Installation tools

(please prepare before installation)

Metal Detector Screwdriver Pencil

Impact Drill 10MM Drill Bit Wrench

Conﬁrm the distance of the hole on the back of your TV.

Please conﬁrm your TV mounting

hole is within 400MM*400MM.

Step 1

Step 2

(4)M4x20 -C

MAX 400MM

Please conﬁrm that your TV

weight does not exceed 45KG.

Warning: Please do not exceed

the maximum load-bearing

capacity, which may cause the

equipment falling.

What material is your wall

made of?

Is it a wooden wall?

Please read the instructions thoroughly and have a good

understanding of the entire installation process. Reading the

instructions for your TV to see whether there have any special

instructions for using the brackets or not.

WARNING: Avoid potential personal injury and property damage.

1. Please check your wall fastness, suitable for general wood and

brick, not plasterboard wall

2. The wall must be able to carry 5 times the weight (total of the TV

plus the bracket)

3. Our company does not bear the loss and damage caused by

improper use.

WARNING:

This product

contains very

small parts and is

fatal if swallowed.

Please check the

completeness of

the package

before installation.

If there are any

damaged or

missing parts,

please contact our

customer service

for your solution.

For 23”-55” TVs

Step 3

Choose proper screws

Attach hooks and TV

(without spacers)

Attach hooks and TV (with spacers)

Too short Too long

Step 4 Wall mounting

Hang the TV to the bracket (3 height options)

Put hook protector

into hook as shown.

Tighten the screw

as shown.

Manage cable with cable ties.

Step 5

Correct

4-1 4-2 4-3

Warning: Correct screw

and washer usage

- Too short to ﬁx the TV

- Too long to damage the

Make sure your

screw is right on

the TV hole to

screw into the TV.

Safely tighten

screws with or

without spacers.

Make sure the

screws are

tightened before

proceeding to the

next step.

Please make sure the wall is

safe and then install as shown.

Use a metal

detector to ﬁnd

out if there are

other wires in the

wall, and avoid

the wire while

punching.

Use a pencil to draw the punching hole on

the wall (use the bubble level to ensure the

level).

If it is a wooden wall, please use the self-tapping

screw A directly. If it is a concrete wall, please

ﬁrstly nail the plastic expansion screw B into the

wall, then tighten with the self-tapping screw A.

:after-sales@suptekmount.com :716-777-3938

We hope you never have the need,but if you do,our service is friendly and hassle-free.

suptek A3 User manual

Brand: suptek

Model: A3

Type: User manual

suptek A3

Download PDF

report

suptek A3 User manual

suptek A3 User manual

Related papers

Other documents